There are a number of things that can cause the zero detect. Most probably you have a problem with the signal brushes or the slip ring. Try cleaning the ring and brush block first.
From skilled GE depot repairs to patient-ready accessories, Southeastern Biomedical specializes in GE to keep your facility safe, efficient, and cost-effective. 888-310-7322.
Ricardo Garcia
Zero detect Sytec serie i
July 10, 2009 01:34
Hi, I have a problem with a CT Sytec series i, With axial scan in CW or CCW appears ER-122 Zero Detect, but with stationary scan dont appears.
This is a random problem.
Thanks
to rate and post a comment
Carlos Duran
Re: Zero detect Sytec serie i
July 14, 2009 11:33
Hello ricardo:
you have a problem of miscontact on gantry, because when you take a static this dissapears.
check about some vibration when rotate.
good luck
carlos duran
to rate and post a comment
Ralph Childs
Re: Zero detect Sytec serie i
July 15, 2009 07:51
Ricardo,
There are a number of things that can cause the zero detect. Most probably you have a problem with the signal brushes or the slip ring. Try cleaning the ring and brush block first.
Scooter
scanner1@eim.ae
to rate and post a comment