After switch on the ultrasound machine shows the following message on the screen:
"Systems setting data base engine stopped the process because you and another user area attempting to change the same data at the same time".
As far as I know, the user has not done anything untoward!. The light on the key board and the on/off switch are not on and the machine therefore can’t be switched off. I would really appreciate any advice that could be provided.
My thoughts are that it could be an Ipconflict, a database corruption or a need to reload the software?
Could be a database corrupt, try the database repair procedure, and see if you can repair database. If not you may have to reinitialise hard drive, and reload the software. Hopefully you have a note of the option code, which you will need to get the system to scan.
Hi, John! If you have a Network Printer installed, check the box off if it is configured to bidirectional communication (Xerox, Konica Minolta use to have this feature), or any kind of monitoring instance. This might be causing the disturbance. Please, let us know if it was the issue. Thanks, take care, God Bless. MAC.
The system is locked onto the docking cart and the key is missing. Do you know if the key to the lock is generic or individual to each lock. how easy will this be to replace or will the lock need drilling out!
Hi, John! Thanks for your kind reply. Remember to note the OPTION STRING (Set Up Screen), as Adrian said. You will need it in case you should reinstall the OS and App SW. Regarding the lock, I think it is unique, but I'd tried to get one those used in Laptops, prior to drill it. God luck, take care, God Bless. MAC.
Please help me i need also bootable dvd ios software sw 6.X.X (bt06) and activation key okos and option key Voluson E serial number : B52301
I will not forget the kindness of help. I am in a lot of trouble in this case (after power supply repaired suddenly HDD bowed so very hi pressure by customer he is dancing on my head
Please help me i need also bootable dvd ios software sw 6.X.X (bt06) and activation key okos and option key Voluson E serial number : B52301
I will not forget the kindness of help. I am in a lot of trouble in this case (after power supply repaired suddenly HDD bowed so very hi pressure by customer he is dancing on my head
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
Jonathan Williams
Voluson E Problem
January 09, 2014 07:30
After switch on the ultrasound machine shows the following message on the screen:
"Systems setting data base engine stopped the process because you and another user area attempting to change the same data at the same time".
As far as I know, the user has not done anything untoward!. The light on the key board and the on/off switch are not on and the machine therefore can’t be switched off. I would really appreciate any advice that could be provided.
My thoughts are that it could be an Ipconflict, a database corruption or a need to reload the software?
Thanks in advance
John Williams
to rate and post a comment
Adrian Burrowes
re: Voluson E Problem
January 09, 2014 05:52
Could be a database corrupt, try the database repair procedure, and see if you can repair database. If not you may have to reinitialise hard drive, and reload the software. Hopefully you have a note of the option code, which you will need to get the system to scan.
to rate and post a comment
Marcelo Antonio Correa
re: Voluson E Problem
January 10, 2014 09:59
Hi, John! If you have a Network Printer installed, check the box off if it is configured to bidirectional communication (Xerox, Konica Minolta use to have this feature), or any kind of monitoring instance. This might be causing the disturbance. Please, let us know if it was the issue. Thanks, take care, God Bless. MAC.
to rate and post a comment
Jonathan Williams
re: re: Voluson E Problem
January 10, 2014 02:58
Thanks very much for your replies - I will let you know when its fixed.
to rate and post a comment
Jonathan Williams
re: re: re: Voluson E Problem
January 11, 2014 06:24
The system is locked onto the docking cart and the key is missing. Do you know if the key to the lock is generic or individual to each lock. how easy will this be to replace or will the lock need drilling out!
to rate and post a comment
Marcelo Antonio Correa
re: re: re: re: Voluson E Problem
January 11, 2014 07:03
Hi, John! Thanks for your kind reply. Remember to note the OPTION STRING (Set Up Screen), as Adrian said. You will need it in case you should reinstall the OS and App SW. Regarding the lock, I think it is unique, but I'd tried to get one those used in Laptops, prior to drill it. God luck, take care, God Bless. MAC.
to rate and post a comment
hemrajsinh chauhan
re: re: re: Voluson E Problem
February 10, 2021 04:04
Please help me i need also bootable dvd ios software sw 6.X.X (bt06) and activation key okos and option key Voluson E serial number : B52301
I will not forget the kindness of help. I am in a lot of trouble in this case (after power supply repaired suddenly HDD bowed so very hi pressure by customer he is dancing on my head
to rate and post a comment
Jonathan Williams
re: Voluson E Problem
January 14, 2014 03:49
Reloading the software fixed the problem - thanks for all your help.
to rate and post a comment
hemrajsinh chauhan
re: re: Voluson E Problem
February 10, 2021 04:04
Please help me i need also bootable dvd ios software sw 6.X.X (bt06) and activation key okos and option key Voluson E serial number : B52301
I will not forget the kindness of help. I am in a lot of trouble in this case (after power supply repaired suddenly HDD bowed so very hi pressure by customer he is dancing on my head
to rate and post a comment
hemrajsinh chauhan
re: Voluson E Problem
February 08, 2021 08:52
Hello,
if you have software DVD i need only iso image file of System/Boot DVD
please help me ,i am stuck in this case I will be very grateful to you
System/Boot DVD (6.1.0 )
for Voluson® i / Voluson® e BT’06
If you have any version i will try because i dont know previas version hard disk is crash. model year around 2008
to rate and post a comment