HELLO DEAR COLLEAGUES,
I AM LOOKING FOR HELP TO SOLVE THE ERROR 74 ON A SIREGRAPH D3 SYSTEM.
WHEN LOADING KEY IS ACTUATED TO MOVE THE CASSETTE CARRIAGE FROM PARKING POSITION TO LOADING POSITION IT DOES NOT MOVE AND ERROR 74 IMMEDIATELY APPEARS ON D29. I CHECKED EEPROM DATA AND EVERYTHING IS O.K, REPLACED THE SEARCH RUN SWITCH (S105), ADJUSTED THE BASIC POSITION OF S105, REPLACED D32. LED V4 ON D9 BOARD IS ALWAYS OFF (IT DOES NOT LIT WHEN I PRESS THE LOADING KEY).
COULD ANYBODY HELP ME TO SOLVE THIS PROBLEM? YOUR HELP WILL BE HIGHLY APPRECIATED.
THANKS IN ADVANCE.
MY E-MAIL IS
vijmaal@gmail.com
Hi Lenny,
Thanks a lot for answering.
The problem randomly appears. During tests on site, the machine behaves fine, but during a regular working period it fails (74 on D29). I have already checked all those items,only lack change D9 and D17. I don´t have any similar machine where to test them in. Any clue to test them?
Thanks before hand.
Best regards
Hi Lenny,
Thanks for responding.
The chain tension has never been change and I do not know what the force value should be. Do you have that information to share me, please?
I thank your valuable help.
Regards.
Hello Joe,
Thanks a lot for responding.
Yes, I have it.
According to the checking list of error 74, I have already checked all those items,only lack change D9 and D17.
The problem randomly appears. During tests on site, the machine behaves fine, but during a regular working period, it fails (74 in D29). I don´t have any similar machine where to test them in. Any clue to test them?
Thanks in advance.
Best regards
Hello Vic, I had this problem for 2 weeks, the problem not is in the boards, the problem are the belts of arms in the bucky (take off the bucky, and check the operation of the arms) or the sensor longitudinal (optocupler). I change the bucky and the sensor and the equipmet work fine. the tensión of the chain is not important. ¡good luck!
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Vic MayAl
Siregraph D3 error 74
February 25, 2015 08:42
HELLO DEAR COLLEAGUES,
I AM LOOKING FOR HELP TO SOLVE THE ERROR 74 ON A SIREGRAPH D3 SYSTEM.
WHEN LOADING KEY IS ACTUATED TO MOVE THE CASSETTE CARRIAGE FROM PARKING POSITION TO LOADING POSITION IT DOES NOT MOVE AND ERROR 74 IMMEDIATELY APPEARS ON D29. I CHECKED EEPROM DATA AND EVERYTHING IS O.K, REPLACED THE SEARCH RUN SWITCH (S105), ADJUSTED THE BASIC POSITION OF S105, REPLACED D32. LED V4 ON D9 BOARD IS ALWAYS OFF (IT DOES NOT LIT WHEN I PRESS THE LOADING KEY).
COULD ANYBODY HELP ME TO SOLVE THIS PROBLEM? YOUR HELP WILL BE HIGHLY APPRECIATED.
THANKS IN ADVANCE.
MY E-MAIL IS
vijmaal@gmail.com
to rate and post a comment
Lenny Place
re: Siregraph D3 error 74
February 26, 2015 10:15
74. Longitudinal cassette carriage errors.
Check motor AM105
Check brake BM115 (not released)
Check fuse F4.
Check initialization switch S105 (very often).
Check encoder D80d.
Check encoder board D17
Check motor control board D9
Check motor supply board D32.
to rate and post a comment
Vic MayAl
re: re: Siregraph D3 error 74
February 26, 2015 03:58
Hi Lenny,
Thanks a lot for answering.
The problem randomly appears. During tests on site, the machine behaves fine, but during a regular working period it fails (74 on D29). I have already checked all those items,only lack change D9 and D17. I don´t have any similar machine where to test them in. Any clue to test them?
Thanks before hand.
Best regards
to rate and post a comment
Lenny Place
re: re: re: Siregraph D3 error 74
February 26, 2015 04:50
have you checked the belt tension?
to rate and post a comment
Lenny Place
re: re: re: Siregraph D3 error 74
February 26, 2015 04:50
sorry I meant chain tension
to rate and post a comment
Vic MayAl
re: re: re: re: Siregraph D3 error 74
February 27, 2015 04:42
Hi Lenny,
Thanks for responding.
The chain tension has never been change and I do not know what the force value should be. Do you have that information to share me, please?
I thank your valuable help.
Regards.
to rate and post a comment
Joe bello
re: Siregraph D3 error 74
February 26, 2015 10:43
do you have the error list. if you don't I can send it to you if you give mi your Email accumede@msn.com
to rate and post a comment
Vic MayAl
re: re: Siregraph D3 error 74
February 27, 2015 04:42
Hello Joe,
Thanks a lot for responding.
Yes, I have it.
According to the checking list of error 74, I have already checked all those items,only lack change D9 and D17.
The problem randomly appears. During tests on site, the machine behaves fine, but during a regular working period, it fails (74 in D29). I don´t have any similar machine where to test them in. Any clue to test them?
Thanks in advance.
Best regards
to rate and post a comment
Raul Cervantes
re: re: re: Siregraph D3 error 74
March 09, 2015 08:25
Hello Vic, I had this problem for 2 weeks, the problem not is in the boards, the problem are the belts of arms in the bucky (take off the bucky, and check the operation of the arms) or the sensor longitudinal (optocupler). I change the bucky and the sensor and the equipmet work fine. the tensión of the chain is not important. ¡good luck!
to rate and post a comment