Does anyone have the BIOS settings for QDR4500C running on DOS? Replaced a defective motherboard. Computer boots up to point where it is waiting for the gantry to turn on. Gantry does not turn on and computer then times out. I'm thinking incorrect BIOS settings.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Michael Baumgartner
QDR4500C bootup problem
December 17, 2010 05:45
Does anyone have the BIOS settings for QDR4500C running on DOS? Replaced a defective motherboard. Computer boots up to point where it is waiting for the gantry to turn on. Gantry does not turn on and computer then times out. I'm thinking incorrect BIOS settings.
to rate and post a comment
Lucas Tavares
Re: QDR4500C bootup problem
December 30, 2010 09:38
Hello,
Try reserve IRQ 10 on bios settings.
regards
to rate and post a comment
Michael Baumgartner
Re: QDR4500C bootup problem
December 30, 2010 10:31
Thanks for the info. I have reserved IRQ 10 for the ISA legacy device. I'll take the pc back to customer site and try it again.
to rate and post a comment
Henry Spong
Re: QDR4500C bootup problem
January 02, 2011 11:42
Hi Lucas
looking for the software of the HOLOGIC 4500C please if you can help send email and prices
regards
henry
to rate and post a comment
Michael Baumgartner
Re: QDR4500C bootup problem
January 04, 2011 09:55
Do you know what software version you are needing?
to rate and post a comment