When i turn the machine on sometimes the transducser ares not detected and i have this message:
FEC MOP reported hw error during bootup
(1902-1991-2404-5B30781)
FEC hardware test failure
please I need the user and service manuel for HDI 3000
Please can you send me that by e-mail?
we have the manuales in electronic form Philips Ultrasound systems.
The service manuales for ATL HDI-1500/3000/4000/5000/ APOGEE,CX,ULTRAMARK 9/
WE CAN HELP YOU ASAP aje1214@yahoo.com
I have a boot up error problem with an ATL HDI 3000 FEC MPO error 1902-1991-2404 does anyone know how to fix this problem? I would not allow me to do scans
Hello,
I commented that, It happened to me the same thing, and the problem was on a card behind to scanhead selector module, one of which must be with some components damaged; in my case three capacitors of 10mF to 25v (the which are yellow) in the AIM REGULATOR MODULE; one, eye covered by a lid in the area of connection to scanhead selector module.
Good luck.
Tchokothe Guy
problem with US HDI 3000
November 22, 2009 01:50
I have problem with US HDI 3000
When i turn the machine on sometimes the transducser ares not detected and i have this message:
FEC MOP reported hw error during bootup
(1902-1991-2404-5B30781)
FEC hardware test failure
please I need the user and service manuel for HDI 3000
Please can you send me that by e-mail?
Tanks
to rate and post a comment
Chris Baklik
Re: problem with US HDI 3000
November 23, 2009 09:56
I can help you e-mail me back
to rate and post a comment
Alan Ehrlich
Re: problem with US HDI 3000
November 23, 2009 03:10
we have the manuales in electronic form Philips Ultrasound systems.
The service manuales for ATL HDI-1500/3000/4000/5000/ APOGEE,CX,ULTRAMARK 9/
WE CAN HELP YOU ASAP aje1214@yahoo.com
to rate and post a comment
Jose Dominguez
Re: problem with US HDI 3000
March 09, 2010 07:21
If you have an ATL Service Manual for a 1500 System, please quote.
Jose.dominguez@medintek.com
Thanks,
Jose
to rate and post a comment
Murat Canpolat
Re: problem with US HDI 3000
March 10, 2010 09:30
i have service manual pdf format for HDI3500 -4000-5000-1500... et please contac muratcanpolat@hotmail.com.tr
to rate and post a comment
Jorge Lugo
Re: problem with US HDI 3000
March 10, 2010 02:11
I can help you with this trouble, email me jorgelugo84@hotmail.com
to rate and post a comment
Jose Vallejos
Re: problem with US HDI 3000
October 15, 2010 10:03
i have the same error message, please what to do performance for fix this error?....or please tell me why it's error message?
Thank's
to rate and post a comment
Antonio Pisciotta
Re: problem with US HDI 3000
November 04, 2010 05:33
Dear Jose, have you fixed that problem?
Error bootuptest...
to rate and post a comment
joaquin Luque
Re: problem with US HDI 3000
June 07, 2011 09:12
I have a boot up error problem with an ATL HDI 3000 FEC MPO error 1902-1991-2404 does anyone know how to fix this problem? I would not allow me to do scans
to rate and post a comment
Rodolfo Reyes Ingeniero
Re: problem with US HDI 3000
March 17, 2011 09:56
Hi, Tchokothe.
I have the same trouble, do you can tell me if solved this problem and how we can fix?.
I appreciate your help.
Thank you
to rate and post a comment
Pedro Alexander Rodriguez Esquivel
Re: problem with US HDI 3000
September 25, 2011 01:01
Hello,
I commented that, It happened to me the same thing, and the problem was on a card behind to scanhead selector module, one of which must be with some components damaged; in my case three capacitors of 10mF to 25v (the which are yellow) in the AIM REGULATOR MODULE; one, eye covered by a lid in the area of connection to scanhead selector module.
Good luck.
to rate and post a comment
tamda rachid
re: problem with US HDI 3000
December 27, 2013 08:32
Hello,
I have a problem with my ultrasound:
HDI 3000
serie D0WZYQ
Part N° D8500-0030-01
Jan/1998
error code is configintegrityfailed.
can you help me with troubleshooting and service manual.
Best Regards
to rate and post a comment