Dear college,
We need some information and help to start Picker IQ premier Extra.Problem is:
error (hang on system) during bootstrap:
only " - " character on ELTP screen
Picker logo on image monitor
no halted CPU
8 and 1 on CPU display
HD power OK
tape drive works
performed actions:
boards and cables reseated
minimum configuration
check SCSI configuration and termination
diagnostic SW not available
OS SW not available
NV RAM (Dallas chip) on our board (CPB 177284) is out of date (manufactured 1993, 10yrs normal life time of chip battery)
If somebody have experience please help.
ekspres0@yahoo.com
++381 64 142 8268
Radomir
you problem is boot.
You need to reinstall complete software because is hang up during the boot.
if you have problems let me know also for spare parts.
regards
umberto sciunnach
u.sciunna@tiscali.it
sounds like a software problem. let me know if previously you got the message "starting disk" "spin up complete" or other
try reinstalling the soft. you ll need a tape named pity for that purpose
regards
From skilled GE depot repairs to patient-ready accessories, Southeastern Biomedical specializes in GE to keep your facility safe, efficient, and cost-effective. 888-310-7322.
Radomir Lukic
problem with Picker IQ
September 19, 2005 07:35
Dear college,
We need some information and help to start Picker IQ premier Extra.Problem is:
error (hang on system) during bootstrap:
only " - " character on ELTP screen
Picker logo on image monitor
no halted CPU
8 and 1 on CPU display
HD power OK
tape drive works
performed actions:
boards and cables reseated
minimum configuration
check SCSI configuration and termination
diagnostic SW not available
OS SW not available
NV RAM (Dallas chip) on our board (CPB 177284) is out of date (manufactured 1993, 10yrs normal life time of chip battery)
If somebody have experience please help.
ekspres0@yahoo.com
++381 64 142 8268
Radomir
to rate and post a comment
Umberto Sciunnach
Re: problem with Picker IQ
September 19, 2005 11:09
you problem is boot.
You need to reinstall complete software because is hang up during the boot.
if you have problems let me know also for spare parts.
regards
umberto sciunnach
u.sciunna@tiscali.it
to rate and post a comment
gustavo fiochi
Re: problem with Picker IQ
September 19, 2005 10:29
sounds like a software problem. let me know if previously you got the message "starting disk" "spin up complete" or other
try reinstalling the soft. you ll need a tape named pity for that purpose
regards
to rate and post a comment
Marshall Shannon
Re: problem with Picker IQ
September 20, 2005 06:39
As the system comes up, press CR or return to go to the menu prior to allowing it to AUTOBOOT.
Once there, run #3 directory structure test
Then run, #4or5 rebuild database
This will take a while, however, good chance it will repair the issues.
to rate and post a comment
Raymundo Miranda
Re: problem with Picker IQ
October 09, 2005 03:46
I have an ECODE: 512 BRD: SIF SLOT #6
ANB ERROR, MAX. RETRIES (XSC PORT)
WHEN I TRY TO MAKE WARM UP COULD YOU OR SOME ONE HELP ME
to rate and post a comment
Miguel de los Santos
Re: problem with Picker IQ
June 02, 2006 09:35
run ring diagnostics to watch what sector is dirty on slip ring, clean slip ring 9, 10 ,11,12
to rate and post a comment