1. Workstation boots fully. C Arm stops at 18th arrow,then completes booting with CHARGER FAIL message. Error log details GIB ERROR> Error 11, CHARGERR FAILED DURING BOOT Inverter B:0:47 Charger I Sense e:0:00
Charger board okay. Should I change Generator Interface Board? Indication on board '6E'
Any method to check the ISense?
Guidance required. (Wires and connections okay)
2. XRAY DISABLED.
Unit Boots fully. all connection checked and found okay. Should I suspect the GIB in this case too?
Guidance required.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
R GOPAL
OEC 9800
March 13, 2017 03:15
Dear Friends,
I have two different issues with two machines.
1. Workstation boots fully. C Arm stops at 18th arrow,then completes booting with CHARGER FAIL message. Error log details GIB ERROR> Error 11, CHARGERR FAILED DURING BOOT Inverter B:0:47 Charger I Sense e:0:00
Charger board okay. Should I change Generator Interface Board? Indication on board '6E'
Any method to check the ISense?
Guidance required. (Wires and connections okay)
2. XRAY DISABLED.
Unit Boots fully. all connection checked and found okay. Should I suspect the GIB in this case too?
Guidance required.
Best Regards
R.Gopal
aparnaelectromech@gmail.com
to rate and post a comment
Yathi
re: OEC 9800
March 14, 2017 10:24
Check battery
to rate and post a comment