CAN ANYONE HELP ME.
WHEN REINSTALLING MVP80 GENERATOR, I HAVE 2 ERRORS.
error code : 173
error name : TX INTERNAL
Description : No data is being transmitted to the power Cabinet.
Possible loss of clock in Power Cabinet
error code : 162
error name : RX WATCHDOG
Description : Timeout for reception of data from Power Cabinet has
expired. Data is not being received.
THANKS IN ADVANCE.
BEST REGARDS
François Kahn
Centre d'Affaires Médical (C.A.M)
62, rue Beaumarchais
93100 Montreuil France
tel : 33 (0)1 49 20 86 90
fax : 33 (0)1 49 20 86 95
fkahn@camedical.com
I would suspect that the Fiber optic lines may have been damaged during the move or are not completely inserted in the boards. I think there three lines between the console computer and the micro computer in the generator cabinet. 1. TX, 2. RX, 3. Clock, Try swapping end for end and see if the prolem changes.
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Francois Kahn
MVP 80 error codes
July 25, 2007 11:03
CAN ANYONE HELP ME.
WHEN REINSTALLING MVP80 GENERATOR, I HAVE 2 ERRORS.
error code : 173
error name : TX INTERNAL
Description : No data is being transmitted to the power Cabinet.
Possible loss of clock in Power Cabinet
error code : 162
error name : RX WATCHDOG
Description : Timeout for reception of data from Power Cabinet has
expired. Data is not being received.
THANKS IN ADVANCE.
BEST REGARDS
François Kahn
Centre d'Affaires Médical (C.A.M)
62, rue Beaumarchais
93100 Montreuil France
tel : 33 (0)1 49 20 86 90
fax : 33 (0)1 49 20 86 95
fkahn@camedical.com
to rate and post a comment
Staate Hayward
Re: MVP 80 error codes
July 25, 2007 02:57
I would suspect that the Fiber optic lines may have been damaged during the move or are not completely inserted in the boards. I think there three lines between the console computer and the micro computer in the generator cabinet. 1. TX, 2. RX, 3. Clock, Try swapping end for end and see if the prolem changes.
to rate and post a comment
Francois Kahn
Re: MVP 80 error codes
July 25, 2007 04:33
many thanks for this answer. i'll try and will come back to you.
fkahn
to rate and post a comment
Elliot Marcus
Re: MVP 80 error codes
July 25, 2007 04:19
Try swapping the Tx and Rx cables at the board
to rate and post a comment