It appears that you will need to replace the NVRAM. If you email me at debi.breland@digitecmedical.com I will give you the information on the one we have in stock.
You need to replace the NVRAM P#M4T28-BR12SH and then you need to restore backup data into the unit. If you do not have the backup data. You need to run all calibration.
Hi, I had the same error, I replaced the NVRAM, but I don't have the backup data, can you help me with instructions or service manual, an error 44 appears some times after x ray. Regards
Medical Equipment Superstore closeout auctions take place on DOTmed.com. Bid today on 276 lots of medical equipment. Items can be inspected in person or via video call. Contact Rick at +1 (215) 669-3913 or info@medicalequipmentsuperstore.com
surasit kruata
lorad affinity error 12 nvram failed
January 28, 2015 08:39
I have a problem with a Mammo - Lorad Affinity Mammo
Model No. 3-000-5066
The Lorad Affinity is presenting an error code: Error 12 ( nvram failed during power on )
I will appreciatte any ideas, Thanks.
to rate and post a comment
Deborah Breland
re: lorad affinity error 12 nvram failed
January 28, 2015 05:38
It appears that you will need to replace the NVRAM. If you email me at debi.breland@digitecmedical.com I will give you the information on the one we have in stock.
to rate and post a comment
Natthakit Prongchai
re: lorad affinity error 12 nvram failed
January 29, 2015 10:03
You need to replace the NVRAM P#M4T28-BR12SH and then you need to restore backup data into the unit. If you do not have the backup data. You need to run all calibration.
to rate and post a comment
surasit kruata
re: re: lorad affinity error 12 nvram failed
January 30, 2015 09:13
Thank so much k.Natthakit for your reply my email.
to rate and post a comment
Lobsang Ortiz
re: re: lorad affinity error 12 nvram failed
February 01, 2015 10:24
Hi, I had the same error, I replaced the NVRAM, but I don't have the backup data, can you help me with instructions or service manual, an error 44 appears some times after x ray. Regards
to rate and post a comment
juan pablo amado
re: lorad affinity error 12 nvram failed
February 01, 2015 10:26
do you measure voltage in backup cell of nvram? I have this trouble and fix it by a 3V IonLi cell
to rate and post a comment