Hi
I need help am working with a LighSpeed 4x
I have the following error on the console:
DHCB has cleared the following error:
DHCB Control and/or control error
with a second msg
DHCB has issued a warning condition: DHCB Error is as follows:
DHCB was reset
After this message everything works properly for 10min then the same massage appears.
I decide to change the DHCB board and i had no success with solving the error.
The following replacement were made:
24v PS
DCB
DMB
cables connected to DHCB
I will apprecciate if you could assist me with and idea of what might be the problem or if you been thru a similar situation.
Pablo Gutierrez
LightSpeed 4.x DHCB ERROR
November 26, 2019 10:38
Hi
I need help am working with a LighSpeed 4x
I have the following error on the console:
DHCB has cleared the following error:
DHCB Control and/or control error
with a second msg
DHCB has issued a warning condition: DHCB Error is as follows:
DHCB was reset
After this message everything works properly for 10min then the same massage appears.
I decide to change the DHCB board and i had no success with solving the error.
The following replacement were made:
24v PS
DCB
DMB
cables connected to DHCB
I will apprecciate if you could assist me with and idea of what might be the problem or if you been thru a similar situation.
to rate and post a comment
Sreten Mandic
re: LightSpeed 4.x DHCB ERROR
February 17, 2021 11:25
Dear David,
we have similar problem with BrightSpeed 16 Elite. Did you solve your problem?
Sreten Mandic
to rate and post a comment