Over 100 Missouri Auctions End Today - Bid Now Over 400 Total Lots Up For Auction at Four Locations - Over 80 Utah Auctions End Tomorrow 06/18 - Bid Now, TX 06/24, KS 06/25, CA 06/26
Konica Dry Pro 752 Laser Printer-- Error code problem
April 23, 2010 06:03
I turn this unit on and it sits there forever and never comes up to the ready screen.Finallt after rebooting several times, it comes up with "EBC52" and another time "FBO83" error codes. It will not print . I have no manual. I would greatly appreciate any help you can give me.
Thank You --Dan
Radx54@aol.com
Re: Konica Dry Pro 752 Laser Printer-- Error code problem
February 18, 2011 09:36
The Konice Printlink 2 is connect and working ok with DRYPRO 771 laser imager as ( SCT-7800- Scanner ------------ Printlink2----------------- Drypro 771 )
But at this time, The Hospital change to use the Fuji Drypix4000 for print film,
So I need to config it to ( SCT-7800- Scanner ----- Printlink2-------- Drypix4000 ).
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Daniel Alandar
Konica Dry Pro 752 Laser Printer-- Error code problem
April 23, 2010 06:03
I turn this unit on and it sits there forever and never comes up to the ready screen.Finallt after rebooting several times, it comes up with "EBC52" and another time "FBO83" error codes. It will not print . I have no manual. I would greatly appreciate any help you can give me.
Thank You --Dan
Radx54@aol.com
to rate and post a comment
yuan bo
Re: Konica Dry Pro 752 Laser Printer-- Error code problem
April 23, 2010 11:37
i can help you, please contact obnauy@163.com
to rate and post a comment
Bao Vo Quoc
Re: Konica Dry Pro 752 Laser Printer-- Error code problem
February 18, 2011 09:36
The Konice Printlink 2 is connect and working ok with DRYPRO 771 laser imager as ( SCT-7800- Scanner ------------ Printlink2----------------- Drypro 771 )
But at this time, The Hospital change to use the Fuji Drypix4000 for print film,
So I need to config it to ( SCT-7800- Scanner ----- Printlink2-------- Drypix4000 ).
I need your help to instruc me to do it.
Thanks and Best Regards
Bao
to rate and post a comment
le hai nam
Re: Konica Dry Pro 752 Laser Printer-- Error code problem
February 19, 2011 09:00
Hi Vo Quoc Bao,
We can support and help you to clear this problem.
Pls contact me via email: hainam.le6@gmail.com
Thanks you,
to rate and post a comment