Need to know what cart level.
If it has 2 computers in the back(dual motherboard), this would signify that they aren’t communicating with each other.
If only one computer UMB (3 hard drives) or EMB (1 hard drive) I would replace the HDD’s .
I have already received some with this error 606, 80% had a defect in the HD sip, and older hardware had software corruption, this will depend on the type of hardware version of this iU22, as it exists, as variations (A, B, C, D, E, F, G or R), but investigate whether there is communication with the SIP subsystem with Host, using the oscilloscope if the waveform is present. I hope I have helped from a distance it is difficult to help.
I have already received some with this error 606, 80% had a defect in the HD sip, and older hardware had software corruption, this will depend on the type of hardware version of this iU22, as it exists, as variations (A, B, C, D, E, F, G or R), but investigate whether there is communication with the SIP subsystem with Host, using the oscilloscope if the waveform is present. I hope I have helped from a distance it is difficult to help.
606
Condition
SIP Power Failed To Initialize.
Description
Platform Monitor failed to start the System Power process.
Corrective Action
Possible causes: (1) SIP is not answering on named pipe or (2) Host
physical memory problem. Troubleshoot Dolphin IPL. See the article:
'MTE: Troubleshooting the IPL (T-00046)'.
INFO-
Hello, reconnect cable between Doplphin cards, otherwise - reinstall sw.
Is it hw B with 2 motherboards?
Code 606
Condition
SIP Power Failed To Initialize.
Description
Platform Monitor failed to start the System Power process.
Corrective Action
Possible causes: (1) SIP is not answering on named pipe or (2) Host
physical memory problem. Troubleshoot Dolphin IPL. See the article:
'MTE: Troubleshooting the IPL (T-00046)'.
ok you mean the software on SIP could be corrupted ? it has 2 other drives on the SIP box - Can you send me a picture of that firewire cable please ? - Would also want to know the parameters to put in the Bios please .
Specializing in GE, we keep your ICU monitors calibrated and patient-ready—fast, reliable service from expert biomed techs. Southeastern Biomedical: 888-310-7322.
Garald jean louis
IU22 ERROR CODE 606
December 01, 2023 05:42
good day -
Im reporting an error 606 on an IU22 ultrasound from Philips . can anyone give me a clue to solve the problem please .
thanks
to rate and post a comment
YASEEN AKHTAR
re: IU22 ERROR CODE 606
December 04, 2023 10:34
Hi sir
to rate and post a comment
Garald jean louis
re: re: IU22 ERROR CODE 606
December 05, 2023 11:39
yes it has 1 mother board and 3 hard drives
to rate and post a comment
NCFSE
re: IU22 ERROR CODE 606
December 04, 2023 10:35
Need to know what cart level.
If it has 2 computers in the back(dual motherboard), this would signify that they aren’t communicating with each other.
If only one computer UMB (3 hard drives) or EMB (1 hard drive) I would replace the HDD’s .
to rate and post a comment
Abtech eletronica
re: IU22 ERROR CODE 606
December 04, 2023 10:35
I have already received some with this error 606, 80% had a defect in the HD sip, and older hardware had software corruption, this will depend on the type of hardware version of this iU22, as it exists, as variations (A, B, C, D, E, F, G or R), but investigate whether there is communication with the SIP subsystem with Host, using the oscilloscope if the waveform is present. I hope I have helped from a distance it is difficult to help.
to rate and post a comment
Abtech eletronica
re: IU22 ERROR CODE 606
December 04, 2023 10:35
I have already received some with this error 606, 80% had a defect in the HD sip, and older hardware had software corruption, this will depend on the type of hardware version of this iU22, as it exists, as variations (A, B, C, D, E, F, G or R), but investigate whether there is communication with the SIP subsystem with Host, using the oscilloscope if the waveform is present. I hope I have helped from a distance it is difficult to help.
to rate and post a comment
EDGAR SANTIAGO RIVERA ZAMUDIO
re:IU22 ERROR CODE 606
December 04, 2023 10:35
clean the ram memory cards and sockets
to rate and post a comment
Garald jean louis
re: re:IU22 ERROR CODE 606
January 09, 2024 09:57
just remove them and clean them could help ?
to rate and post a comment
Nikolas
re: IU22 ERROR CODE 606
December 04, 2023 10:36
606
Condition
SIP Power Failed To Initialize.
Description
Platform Monitor failed to start the System Power process.
Corrective Action
Possible causes: (1) SIP is not answering on named pipe or (2) Host
physical memory problem. Troubleshoot Dolphin IPL. See the article:
'MTE: Troubleshooting the IPL (T-00046)'.
INFO-
Hello, reconnect cable between Doplphin cards, otherwise - reinstall sw.
Is it hw B with 2 motherboards?
to rate and post a comment
juan pablo amado
re: IU22 ERROR CODE 606
December 04, 2023 01:22
Code 606
Condition
SIP Power Failed To Initialize.
Description
Platform Monitor failed to start the System Power process.
Corrective Action
Possible causes: (1) SIP is not answering on named pipe or (2) Host
physical memory problem. Troubleshoot Dolphin IPL. See the article:
'MTE: Troubleshooting the IPL (T-00046)'.
to rate and post a comment
Garald jean louis
re: re: IU22 ERROR CODE 606
January 09, 2024 09:57
ok you mean the software on SIP could be corrupted ? it has 2 other drives on the SIP box - Can you send me a picture of that firewire cable please ? - Would also want to know the parameters to put in the Bios please .
to rate and post a comment