hi every body, I need help with a hologic qdr4500c, when turn on and load de software the screen shown "No A/C time interrupt", check instrument, emergency and X-Ray enable key.
in details of QDR software say LOCUS HAPI.
i don't have 28vcd because it is block. I Check almost every thing and nothing .
the equipment turn off normally and for the other day when turn on it don't want turn on correctly.
if some body can help me, thank very much
Ricardo
Ricardo Rivera
hologic QDR4500c help
October 19, 2017 10:35
hi every body, I need help with a hologic qdr4500c, when turn on and load de software the screen shown "No A/C time interrupt", check instrument, emergency and X-Ray enable key.
in details of QDR software say LOCUS HAPI.
i don't have 28vcd because it is block. I Check almost every thing and nothing .
the equipment turn off normally and for the other day when turn on it don't want turn on correctly.
if some body can help me, thank very much
Ricardo
to rate and post a comment
Rick Ebling
re: hologic QDR4500c help
October 21, 2017 10:18
check that aperture is turning.
to rate and post a comment
Nguyen Huy Dat
re: hologic QDR4500c help
November 09, 2017 08:29
PC is not look PCI card. Or
X-Ray control board was problem
to rate and post a comment