Type yourHi everyone,I have a problem with a MRI HITACHI APERTO,
I show the following error:
Scan error the resonant frequency is not found frequency lock check the MR
unit and the coil error no 12135000 prescan software.
My inspections:
1- the error exist with all the coils.
2- the magnet temp. is ok 32 degree
3- at the table coil connector the coax pins are ok
What do you think the cause and how to solve the problem?
Ive got almost the same problem on Airis Mate system
The problem appears usually after the scanogram at the first attempt of the 2nd sequence. After this no scano is possible . Restarting the system sometimes 1 examination can be done. No more, the same error appears.
From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
richardgomez
HITACHI APERTO
August 29, 2017 09:03
Type yourHi everyone,I have a problem with a MRI HITACHI APERTO,
I show the following error:
Scan error the resonant frequency is not found frequency lock check the MR
unit and the coil error no 12135000 prescan software.
My inspections:
1- the error exist with all the coils.
2- the magnet temp. is ok 32 degree
3- at the table coil connector the coax pins are ok
What do you think the cause and how to solve the problem?
Regards. question or comment here...
to rate and post a comment
Miguel Moura
re:HITACHI APERTO
August 30, 2017 10:02
Hello Malcom.
Where are you based? Which company?
Maybe I can help with Aperto problem
to rate and post a comment
richardgomez
re: re:HITACHI APERTO
August 31, 2017 10:17
thanks for your answer.
The système is in dakar ;Sénégal
but the problem has be resorber.it was the frequence search
to rate and post a comment
richardgomez
re: re:HITACHI APERTO
August 31, 2017 10:17
thanks for your answer.
The système is in dakar ;Sénégal
but the problem has be resorber.it was the frequence search
to rate and post a comment
Tibor Ivanszky
re: re:HITACHI APERTO
August 31, 2017 10:18
Ive got almost the same problem on Airis Mate system
The problem appears usually after the scanogram at the first attempt of the 2nd sequence. After this no scano is possible . Restarting the system sometimes 1 examination can be done. No more, the same error appears.
to rate and post a comment
MRAdmin
re: HITACHI APERTO
September 02, 2017 03:07
check the receiving path, it looks that the receiving path have problem.
to rate and post a comment