The table will go down on it's own and the x-ray tube will follow. This will happen with or without the patient on the table. System will still make xrays.
Anyone ever seen this problem or know what migh be the cause? No erreor messages generated.
Thank you in advance.
Issue 2:
System allows exposures when moving form the table to the WCS. However, when you move form the WCS, after taking an exposure to the table, the system does not provide a ready signal and has to be rebooted.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Larry Sprague
GE XR/d issues
April 04, 2012 12:42
Issue 1:
The table will go down on it's own and the x-ray tube will follow. This will happen with or without the patient on the table. System will still make xrays.
Anyone ever seen this problem or know what migh be the cause? No erreor messages generated.
Thank you in advance.
Issue 2:
System allows exposures when moving form the table to the WCS. However, when you move form the WCS, after taking an exposure to the table, the system does not provide a ready signal and has to be rebooted.
Any ideas what might be the cause.
Thank you in advance.
to rate and post a comment