Good day! Does anyone here encounter a GE VMX PLUS Xray,with a error 512,there is no exposure. The error comes out after pressing the exposure button. Can you please help me?or send me a copy of advanced service documentation?
Hello Sir, 512 is a KV rise error. If no arcing found on HV tips - cables or x-ray tube and feedback +/- KV cables from HT, then there could be 2 possible problem I think. 1st and worst case is HT problem (HV doublers). 2nd is in the Kvp measurment, Kvp voltage control and securities Sir. You'll need a digital scope and a good PDF copy Sir. Saan galing ito Sir? Sa UERMMC ba?
Hi sir!Thanks for your reply,the unit is not from uermmc. I've already check the machine, I'm not sure if there is an arching during exposure,but the rad tech said,a rectifier diode has been replaced last time by the other technician. But I've not yet seen it. I just test the machine and an error comes out. Do you think the xray problem can be solve?
hello! Please tell me who you can: I have a vmx plus x-ray and it has this problem: I start it, wait for the permission to take a photo, turn on the button for the photo, but it does not take a photo, I have a problem: ERROR. Where is the problem ? Thank you 512
hello! Please tell me who you can: I have a vmx plus x-ray and it has this problem: I start it, wait for the permission to take a photo, turn on the button for the photo, but it does not take a photo, I have a problem: ERROR. Where is the problem ? Thank you 512
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Jonathan Gonzales
GE VMX PLUS ERROR 512
July 11, 2014 04:28
Good day! Does anyone here encounter a GE VMX PLUS Xray,with a error 512,there is no exposure. The error comes out after pressing the exposure button. Can you please help me?or send me a copy of advanced service documentation?
othelo0314@gmail.com
to rate and post a comment
gerardo millena
re: GE VMX PLUS ERROR 512
July 12, 2014 12:00
Hello Sir, 512 is a KV rise error. If no arcing found on HV tips - cables or x-ray tube and feedback +/- KV cables from HT, then there could be 2 possible problem I think. 1st and worst case is HT problem (HV doublers). 2nd is in the Kvp measurment, Kvp voltage control and securities Sir. You'll need a digital scope and a good PDF copy Sir. Saan galing ito Sir? Sa UERMMC ba?
to rate and post a comment
gerardo millena
re: GE VMX PLUS ERROR 512
July 12, 2014 12:00
Hello Sir, pag shoot mo ba tumunog iyon HV inverter? Baka putok fuse ng inverter mo Sir.
to rate and post a comment
Jonathan Gonzales
re: re: GE VMX PLUS ERROR 512
July 13, 2014 12:32
Hi sir!Thanks for your reply,the unit is not from uermmc. I've already check the machine, I'm not sure if there is an arching during exposure,but the rad tech said,a rectifier diode has been replaced last time by the other technician. But I've not yet seen it. I just test the machine and an error comes out. Do you think the xray problem can be solve?
to rate and post a comment
Naser Zymberi
re: GE VMX PLUS ERROR 512
June 28, 2021 11:20
hello! Please tell me who you can: I have a vmx plus x-ray and it has this problem: I start it, wait for the permission to take a photo, turn on the button for the photo, but it does not take a photo, I have a problem: ERROR. Where is the problem ? Thank you 512
to rate and post a comment
Naser Zymberi
re: GE VMX PLUS ERROR 512
June 28, 2021 11:34
hello! Please tell me who you can: I have a vmx plus x-ray and it has this problem: I start it, wait for the permission to take a photo, turn on the button for the photo, but it does not take a photo, I have a problem: ERROR. Where is the problem ? Thank you 512
to rate and post a comment