Over 100 Missouri Auctions End Today - Bid Now Over 450 Total Lots Up For Auction at Four Locations - Over 1150 Cleansweep Auctions End Tomorrow 07/16 - Bid Now, CA 07/17, VA 07/21, CA 07/22
Startup problems, after replacement of NVRAM
The factory settings were loaded, but I do not have the memory size configuration data. I need the address to correct to define ram size for cpu MVME167. now shows 0x4000000 and need define 0x2000000 BSP
CC Medical provides reliable ultrasound systems, probes, system parts, & technical support serving hospitals and healthcare providers domestically & internationally. Wholesale pricing available. 833-309-4229. Se Habla Espanol sales@ccmedicalhs.com
hiortsam dade
GE SYSTEM FIVE BOOT PROBLEM
February 03, 2017 10:04
My GE System Five would not boot. After connecting hyperterminal to the system, I found out that it hangs at this place:
CreatingUVpipes...
UVpipescreated
RFT_RPC::loadprogram()
FEC_RPC::loadprogram()
This is my settings:
bootdevice :scsi=0,0
unitnumber :0
processornumber :0
filename :/hd0/vxWorks
inetonethernet(e):3.222.21.232:fffffc00
user(u) :s5_rack
flags(f) :0x8
targetname(tn) :wind8
startupscript(s) :etc/init
other(o) :ei
Has any one any help or experience regarding this?
Thank you
to rate and post a comment
juan pablo amado
re: GE SYSTEM FIVE BOOT PROBLEM
May 08, 2018 03:16
Startup problems, after replacement of NVRAM
The factory settings were loaded, but I do not have the memory size configuration data. I need the address to correct to define ram size for cpu MVME167. now shows 0x4000000 and need define 0x2000000 BSP
to rate and post a comment