Hello Everyone, I have a GE Prodigy with an intermittent error- "scanner Reset". I have check the log but ther is very little information about this error. If you have any feed back it will be greatly appreciated.
I'm also looking for the service password to the latest prodigy software Ver. 11.20.068
Thanks
John Mendoza
Most common problem with the Prodigy is the cables. Check the bulkheads for connectivity, and the voltages to the detector. Bad shorts cause missing voltages in the upper cable bundle.
Sell your scrap MRI magnets! Top prices, free shipping, and fast pickups. Don't let dust-collecting, idle assets go to waste. Contact: ryan.swiderski@cyclicmaterials.earth or call 437-826-1621
John Mendoza
GE Prodigy problem
July 29, 2009 02:43
Hello Everyone, I have a GE Prodigy with an intermittent error- "scanner Reset". I have check the log but ther is very little information about this error. If you have any feed back it will be greatly appreciated.
I'm also looking for the service password to the latest prodigy software Ver. 11.20.068
Thanks
John Mendoza
to rate and post a comment
Jailyn Primus
Re: GE Prodigy problem
September 10, 2009 08:55
Most common problem with the Prodigy is the cables. Check the bulkheads for connectivity, and the voltages to the detector. Bad shorts cause missing voltages in the upper cable bundle.
to rate and post a comment
Jailyn Primus
Re: GE Prodigy problem
September 10, 2009 08:55
Short in the bulkheads or short in the wiring going to the detector. Or short in the3 upper cable bundle
to rate and post a comment