GE HISPEED ADVANTADE RP Scanning subsystem problem
June 03, 2003 01:10
Hello Guys
I have a problem in the GE Hispeed Advantage RP CT Scanner. The boots up properly. But while performing tube warmup or normal scans the message prompts "There is a problem in the scanning subsystem".
Although the hardware reset successful prompt appears during boot up.
Can any body give me the reason of this problem and its solution.
Shall wait for the reply from experienced engineers.
Re: GE HISPEED ADVANTADE RP Scanning subsystem problem
June 04, 2003 06:17
What is your error log stating? Look through your error logs to see what is happening during the system startup. See if somethings is not communicating.
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
John Chan
GE HISPEED ADVANTADE RP Scanning subsystem problem
June 03, 2003 01:10
Hello Guys
I have a problem in the GE Hispeed Advantage RP CT Scanner. The boots up properly. But while performing tube warmup or normal scans the message prompts "There is a problem in the scanning subsystem".
Although the hardware reset successful prompt appears during boot up.
Can any body give me the reason of this problem and its solution.
Shall wait for the reply from experienced engineers.
to rate and post a comment
Dave Roberts
Re: GE HISPEED ADVANTADE RP Scanning subsystem problem
June 04, 2003 06:17
What is your error log stating? Look through your error logs to see what is happening during the system startup. See if somethings is not communicating.
to rate and post a comment