can someone help me ? I have a problem with a DMR+ The gantry cpu board was bad and I have change it with an use one that that the cpu battery wasn't there and used the battery with the faulty one and now I have a checksum
matter I HAVE THE backup on the diskette and I don't succeed to use the mammacom to restore
what is the connector or the config of mammocom?
Hi,Zekeng
The serial port was configured like 9600,8,N,1. The standard cable is DB9 to DB9, PIN 2 to PIN 3, PIN 3 to PIN 2 and PIN 5 to PIN 5. I hope help you.
I still have not been able to communicate the laptop mammography and the operating system that I use for this purpose is the windows 98 and the cable that I use works well with my port since I used both with other machines
and here is just a question I was wondering if I could swap the eeprom from the old card with the new or what could be the result
Hi Mr.june .. I really need your help..I have error on my dmr mamogrphy...it's E13 'E04 .. Amd the arm is not moving at all...and i chenge the B44 'B49 in arm but the program still there
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
zekeng brice
DMR+ backup
November 06, 2013 06:22
can someone help me ? I have a problem with a DMR+ The gantry cpu board was bad and I have change it with an use one that that the cpu battery wasn't there and used the battery with the faulty one and now I have a checksum
matter I HAVE THE backup on the diskette and I don't succeed to use the mammacom to restore
what is the connector or the config of mammocom?
to rate and post a comment
Juan Perea
re: DMR+ backup
November 07, 2013 12:28
Hi,Zekeng
The serial port was configured like 9600,8,N,1. The standard cable is DB9 to DB9, PIN 2 to PIN 3, PIN 3 to PIN 2 and PIN 5 to PIN 5. I hope help you.
Regards
to rate and post a comment
zekeng brice
re: re: DMR+ backup
November 07, 2013 02:46
THANKS I WILL TRY IT
to rate and post a comment
KONSTANTINOS PATTICHIS
re: re: DMR+ backup
November 07, 2013 03:14
You must be careful for what are the ver. eeprom B44 AND B49
to rate and post a comment
zekeng brice
re: re: re: DMR+ backup
November 08, 2013 08:06
I still have not been able to communicate the laptop mammography and the operating system that I use for this purpose is the windows 98 and the cable that I use works well with my port since I used both with other machines
and here is just a question I was wondering if I could swap the eeprom from the old card with the new or what could be the result
to rate and post a comment
omar mamdouh
re: re: DMR+ backup
October 29, 2014 04:31
Hi Mr.june .. I really need your help..I have error on my dmr mamogrphy...it's E13 'E04 .. Amd the arm is not moving at all...and i chenge the B44 'B49 in arm but the program still there
to rate and post a comment