That could be a hard drive or corrupted software problem. Try restoring the backup of the presets. Worst case is that it could be caused by a front end board.
It is a software problem, I reload the software and everything is OK but I do not have the options (COLOR, 3D, DICOM, etc) when I try to write the option code in the mod pass the system displays that message and do not boot, do you know how to set the options on the new HDD?
Looking for the leader in urology? BK Medical is and we are the 3rd party experts. We sell BK and many other brands. Call today to discuss your urology equipment needs and save $1,000’s! Call Today: 1-888-838-7488 Email: sales@sentinelimaging.net
ATL Ultramark 400C Problem
March 10, 2016 01:05
Hello, at the end of the booting process the system displays this error message: Checksum of C:/PUBCOLOR/system/probe/atl/prob_p37.pd0 is not correct
Does anyone has an idea? Thanks
to rate and post a comment
Jim Carr
re: ATL Ultramark 400C Problem
March 11, 2016 11:04
That could be a hard drive or corrupted software problem. Try restoring the backup of the presets. Worst case is that it could be caused by a front end board.
to rate and post a comment
Alberto Osuna
re: re: ATL Ultramark 400C Problem
March 11, 2016 03:56
It is a software problem, I reload the software and everything is OK but I do not have the options (COLOR, 3D, DICOM, etc) when I try to write the option code in the mod pass the system displays that message and do not boot, do you know how to set the options on the new HDD?
to rate and post a comment
Miguel Chavira
re: ATL Ultramark 400C Problem
June 02, 2021 02:10
your software is bad
you need reload the software in a new hdd
to rate and post a comment