Over 300 Virginia Auctions End Today - Bid Now Over 300 Total Lots Up For Auction at Three Locations - Over 100 California Auctions End Tomorrow 07/22 - Bid Now, KS 07/24, CA 07/31
amx 4 plus shows 03 04 failed when turned on,in service mode shows check sum error 8,passes calibration.controller pcb has been replaced.manufactured in 2006
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
kevin mattingly
amx 4 plus errors
November 20, 2013 05:46
amx 4 plus shows 03 04 failed when turned on,in service mode shows check sum error 8,passes calibration.controller pcb has been replaced.manufactured in 2006
to rate and post a comment
Mohammed Abdullah
re: amx 4 plus errors
November 20, 2013 07:19
I have all manuals for this system contact me
magmesme@gmail.com
Regards
to rate and post a comment
Lenny Place
re: amx 4 plus errors
November 21, 2013 05:58
you need to perform the calibrations
to rate and post a comment
Steve Hilty
re: amx 4 plus errors
November 22, 2013 09:05
You need to do a complete calibration.
to rate and post a comment