When i turn on the system some time boot up, some time say initiallizing please wait then stop, some dosent recognize any probe some time does, and even the system boot up i never get the cw/pw or color function working.
please i need some help.
probably you have poor contact problems in the lowest rack boards. clean connector of the pcbs in the rigth-back side )memory boards=.
in the upper rack, measure the voltage in the two battery in the third board, from back to front. if the voltaje is low, you may change this batteries.
Leonardo Jacobs
Acuson 128xp10 intermittent problem
May 18, 2004 04:24
When i turn on the system some time boot up, some time say initiallizing please wait then stop, some dosent recognize any probe some time does, and even the system boot up i never get the cw/pw or color function working.
please i need some help.
to rate and post a comment
Carlos Duran
Re: Acuson 128xp10 intermittent problem
June 18, 2004 05:49
hello:
probably you have poor contact problems in the lowest rack boards. clean connector of the pcbs in the rigth-back side )memory boards=.
in the upper rack, measure the voltage in the two battery in the third board, from back to front. if the voltaje is low, you may change this batteries.
good luck
to rate and post a comment