HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com
john dismaya
June 08, 2012 09:40
hi all after the genesis complete boot up and wait the sbc booted up this message appear SBC is booted The system disk devsd0f is almost full f...
Elenilson Novais
March 03, 2026 05:42
Hi everyone I am troubleshooting a Toshiba Aquilion CT scanner and need some guidance on isolating a communication fault Background The system rece...
Horacio Jose Gomez
November 09, 2022 12:32
I have one syngo MMWS running on fujitsu M470 with VE50A SL02P12 software It worked perfect until after configure its DICOM print and I test it con...
Lowell T Gohrick
March 02, 2023 11:21
Im going to try this again and hope there is someone with an idea on a nasty problem in my scanner Here is the situation this system is a PQ 6000 tha...
SELMA ZAMORA
September 16, 2019 09:41
We installed a Aquilion 64 about a year ago it was a very estable system but in march we started to have artifact in images not perceptible but yes ...
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Jose Morillo
March 29, 2018 03:42
Type yoDear colleagues We have a CT EMOTION 16 that show a fatal error on screen when operator turn system on IRS doesnt auto start When operator Tu...
Francisco Garcia
December 29, 2016 10:05
Hi there I performed a tube alignment after replacing X ray tube on the system the process went allright it was until I tried to perform the Image Cal...
Elias Valdes
July 13, 2020 11:15
Hello GE LightSpeed QXi CT scanner Applications will not come up System starts IRIX but as soon as Applications start loading the system freezes and...
Oscar Guetta
June 12, 2017 10:19
Dear All I have a Hispeed QXi 4 slice system Now there is problem with the system disk so I have to load the software I have Operating system CD-ROMs...
Konstantin Ryazanov
July 22, 2021 10:51
I need f service manual for LighSpeed VTC64 We have the following error SYSTEM RU3453CT01 VCT WAUK BASE FV GT2CAR 432WEST RUSSIA SWSERVER VERS ...
Email P/N for pricing: sales@Relaxationinc.com (P) 813-925-1314, www.relaxationinc.com
Posted by an Anonymous March 22, 2014 09:25
The problem System and raw data disks damaged I replace the tow with new ones and tried to load the software CTT 451- bios is set as required a...
David Meireles
January 24, 2014 08:19
Hello all The system is functioning perfectly The problem is when we made the shutdown of the system the gantry made the Reset and stay in ON state...
Enrique Gonzalez
October 18, 2013 10:12
Hello we have a problem with a GE CT FXi system When is powering up the system burns component FL7 that is directly to the PDU connector on the Comp...
German Mamani
May 03, 2014 01:56
Hello We have siemens Somatom ART and i need to connected camera laser by dicom link Kodak but I dnot know wich output to use Thanks...
bubbles of 2.0mhu xray tube for cte/cte dual ct scan
Posted by an Anonymous May 30, 2016 10:33
Good day everyone can anybody give an advice what is the cause for getting tube bubbles We have experience tube bubblesnot only one tube but 5 t...