Ophthalmic-focused expertise in YAG systems including repair, maintenance and calibration handled with precision by trained professionals. Request service • sales@laserlocators.com • 1-877-924-2020
Russell Brown
November 21, 2010 10:57
We have a boat load of these systems in our hospital I am having issues with the touchpads not working on some of the control boards It would appear t...
tahar nouri
September 28, 2015 10:48
hi to all i have a problem on ssa 550A after system starts-up and begins to calibrate the probes a while it displays the following error message ...
Hipolito Jorge Iglesias
November 05, 2010 04:46
Hello to all dear colleagues someone knows what probes could be used in a particular ultrasound acuson sequoia 256c machine youl help will be very a...
Jamal Bazzi
November 10, 2010 09:13
The system was giving a message error NO MOD in the drive This MOD drive is installed on a Ct scanner and we are not able to restore System State d...
Limber Mejia
November 01, 2010 10:10
System does not boot up get ERROR 115 on monitor touch screen does not have display On Gantry TGP Board has error yellow light on ERRA and GLIMT ER...
From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
Sertan Aycibin
September 29, 2010 07:02
Hi there while trying to wake up the system it gives an error Power Communication Failure during the first 5 sec of the check and magnet ramp up stops...
christian boa
September 27, 2010 10:33
I get an Error 24 in plyphos 30M generator D13 board is changing but problem is still there Help is needed Thanks for all informations Christi...
ZAFAR ULLAH
September 27, 2010 10:33
Dear All System was running Good but suddenly got very slow boot up taking about 45 minutes and Reconstruction got very slow as well plz advise wit...
Oscar Chavez
February 18, 2011 09:35
-FYI Hello everyone I received a request for a Dyonics Arthro Tower which then became a request for a CV-160 System I have posted their reply to me be...
ZAFAR ULLAH
October 26, 2010 03:50
Dear All I need someone who knows about Siemens Concerto MRI to inspect physical condition of a system The system is already de installed by a comp...
We offer reliable & cost-effective spare parts for the Philips Achieva 1.5T MRI system helping you minimize downtime & keep operations smooth. Wide inventory available. Quick turnaround time. Expert support. Worldwide delivery. Contact Limor@elsmed.com
nguyen vu
September 11, 2010 10:18
i have an old ultraTEC PFM1 fetal monitor it problem is when i switch on mc displyed system test-passed thru displaying date and time system hang on ...
Barbaros Bulent Temiz
October 13, 2010 02:58
we have problem on this system we are looking for service engineer for this problemSystem is giving scan stop we have also changed the xray tubeWe hav...
Brad Smith
August 25, 2010 09:57
Have a Sytec SRI CT Scanner The gantry just keeps resetting as if someone hits the reset button on the TGP board Its intermittent but when it start...
ahmed buaziza
December 27, 2010 01:44
hallo Dears i getting an error in CT SCAN GE Prospeed XRay Zero detect LCP-03 TN-SEQ ADD-0024 EEEC can you told whats this error and who to s...
Siemens Magnetom Open Viva .2 magnet flow
Jim Foros
November 23, 2010 04:42
I just started servicing the above mentioned system for a new customer The magent water flow is low 22 liters minute but should be 32 l m The water f...