From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
Aleksander Proof
June 23, 2014 10:03
Hi I have problem with logiq 9 Two years the unit was not working video card burned and there were problems with the motherboard I completely chan...
wilco van't Westende
May 14, 2014 09:16
Hello All I have a Logiq 5 expert with the following problem If i try to boot the machine it hangs i have looked at the FEC board the fail light is on...
Konstantin Ryazanov
July 22, 2021 10:51
I need f service manual for LighSpeed VTC64 We have the following error SYSTEM RU3453CT01 VCT WAUK BASE FV GT2CAR 432WEST RUSSIA SWSERVER VERS ...
Posted by an Anonymous May 05, 2014 04:06
Please every one The system is CTe Scanner On starting up 1- Power test failure takes place 2- The DBPCI error is displayed How I ca...
John Ginelli
July 04, 2014 08:53
Nemio XG 160GB HD is failing The only disk I was supplied is the 37 upgrade I do not have a service manualI do have a replacement HD My question is...
MIT labs, experts in Multi-Vendor component level repair of: MRI Coils, RF amplifiers, Gradient Amplifiers Contrast Media Injectors. System repairs, sub-assembly repairs, component level repairs, refurbish/calibrate. info@mitlabsusa.com/+1 (305) 470-8013
Posted by an Anonymous March 22, 2014 09:25
The problem System and raw data disks damaged I replace the tow with new ones and tried to load the software CTT 451- bios is set as required a...
Zach Ruder
March 19, 2014 10:04
We are working with a logiqbook that needed a hard drive put into it We have the software discs but cannot figure out how to get base software loaded...
Le Can
March 04, 2014 10:41
Dear Colleagues I have a Medison Sonoace 8000 Live that stuck near to the end of loading bar and cannot enter on scanning screen A few moment later ...
Martin Bultmann
January 06, 2023 10:26
We had the system starting please wait issue with a 2004 fluoroscan Technician said faulty motherboard and quoted 10000 EUR for fixing We then mea...
David Meireles
January 24, 2014 08:19
Hello all The system is functioning perfectly The problem is when we made the shutdown of the system the gantry made the Reset and stay in ON state...
We are the best choice for all your Endoscopy needs. We have Certified Pre-Owned refurbished and used Endoscopes, and all other related components and accessories. We are committed to your absolute satisfaction. (513) 469-7267
Posted by an Anonymous February 16, 2014 07:35
Hi all can some one help me to set my logiq200cx date thank u all aketech4gmailcom...
Vic MayAl
December 08, 2014 06:08
Hello Axiom Iconos R200 Fluorospot C doesnt work When I turn system on operator console screen shows following message ERR 007051 Unit blocked turn s...
Enrique Gonzalez
October 18, 2013 10:12
Hello we have a problem with a GE CT FXi system When is powering up the system burns component FL7 that is directly to the PDU connector on the Comp...
Genaro Silva Juarez
December 19, 2013 04:35
Hello I have a Voluson 730PRO BT08 with problems one month ago the system showed a error message Agingcheck signal great success any corporationver...
Code 3.2 on D101 of Siregraph D340
Vic MayAl
August 25, 2014 03:58
Hi everybody I am looking for the meaning of code 32 the dot is blinking on D101 board M1 Basic unit of a Siregraph D340 system If this represents a ...