From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
Kot Raphael
October 20, 2003 10:01
Our understanding is that the Aspen unit has been few years in service8 Are the units Analog or digitalI had the impression that they were digitalunti...
JORGE LUIS LOPEZ
May 14, 2026 05:58
hi to all A GE Essential gantry display does not boot showing 160012-H35 positioner boot failed manual only shows up to H34 error gantry unrespons...
Elenilson Novais
March 03, 2026 05:42
Hi everyone I am troubleshooting a Toshiba Aquilion CT scanner and need some guidance on isolating a communication fault Background The system rece...
Marko Shevchuk
September 22, 2025 03:52
Hello colleagues the Acuson X700 system displays a warning every minute for 5 seconds System cooling fans are not working The system is usable but th...
Djezri adda
September 08, 2025 11:05
I have on a Siemens Sonoline prima ultrasound machine After maintenance the system comes up with the message No system insert system disk 1 I mistaken...
50+ Stretchers in stock for immediate rentals. Contact us for a today for a quote.
Leo Samba
September 04, 2025 05:25
I have on a Siemens Sonoline prima ultrasound machine After maintenance the system comes up with the message No system insert system disk 1 I mista...
bashir ahmad
August 29, 2025 04:17
Hi everyone Need your help in Senographe Crystal 2015 modle Configure detector is different from one installed in the system System have no softwa...
Mike Troms
February 23, 2024 04:04
I have a GE Vivd E unit that is showing Operating System Not Found System Serial Number 395195WX1 Version R 602 I believe the hard disk has be...
chrisovaladis KOUMPIS
May 11, 2023 10:25
I connect a 4d probe that checked in an other voluson I and works perfect and the system after the selection of the 4d probe give me a problem sys...
Horacio Jose Gomez
November 09, 2022 12:32
I have one syngo MMWS running on fujitsu M470 with VE50A SL02P12 software It worked perfect until after configure its DICOM print and I test it con...
GCI offers complete MRI & CT sales & service with ROI analysis, in-house financing, contractor drawings, accreditation, training, marketing, and OEM-level support beyond the sale.
Lowell T Gohrick
March 02, 2023 11:21
Im going to try this again and hope there is someone with an idea on a nasty problem in my scanner Here is the situation this system is a PQ 6000 tha...
Saad Elhemedi
October 19, 2022 11:04
Hello There I have a problem with BV29 and I need your help When I press the ON button it starts for a short time and then shuts down I replaced SE...
Tewfik Hamzaoui
April 14, 2022 11:58
Hi I am looking for the Voluson i safety datasheet required by airfreight for the battery Li-Ion transportation as it is considered a dangerous good...
Denis Ngwashi
February 09, 2022 10:03
I get this message when i turn on my equipmentit reads imaging mode disable System erro has occurredrestart the system to restore functionality Servic...
Questions about Philips LX CT Scanner Hard Disk
Suleyman OZKAPTAN
June 16, 2004 10:00
Hello In our system which is in Philips LX there are 2 Hard Disk Drives one is MD0 which is controlled by CPU0 and another one is MD1 which is contr...