Starlux 300 or Starlux 500 service manual
November 11, 2016 10:16
Does anyone have a manual for the Palomar Starlux lasers? It would be helpful to have one for troubleshooting error codes.
to rate and post a comment
re: Starlux 300 or Starlux 500 service manual
November 13, 2016 12:14
I, too need one. Am willing to pay.
re: re: Starlux 300 or Starlux 500 service manual
November 17, 2016 02:47
Shoot me your email address by PM Wayne.
re: re: re: Starlux 300 or Starlux 500 service manual
January 28, 2017 03:42
Hello Joseph, do you still have the Stralux 300 service manual?
September 10, 2019 11:55
I need a service manual as well, I'm getting a 008 code on my starlux 300 any help would be appreciated
October 11, 2017 12:58
Good afternoon, colleagues! An error 68, I Will be what is it? happy if somebody shares service maual for StarLux 500. In our region it is extremely difficult with service. My email firstname.lastname@example.org
October 12, 2017 09:54
The system is not able to establish simmer.
1. Restart the system.
2. Try another handpiece.
3. Call Palomar service.
1. Check High Voltage pins on connector.
2. Replace handpiece.
November 05, 2017 04:16
Hello dear. Do you have the service manual on Palomar StarLux 500 or interpretation of error codes?
On our machine at inclusion with a LUX 1540 HANDPIECE appears 022 and 038 error codes.
I will be grateful for any information.
re: re: re: re: Starlux 300 or Starlux 500 service manual
November 06, 2017 05:16
Handpiece cooltip water flow is restricted/low.
1. Verify rear fluid bypass jumpers are connected properly.
2. Fill reservoir with Palomar fluid.
3. Ensure handpiece is properly seated.
4. Change water filters.
5. Try another hand piece.
6. Call Palomar service.
1. Check handpiece water flow rate.
2. Check handpiece flow switch.
Sw Open = No Flow
Sw Closed = Flow
3. Replace handpiece flow switch.
4. Check wiring.
5. Replace Cooling Module.
Search MedWrench, they have the manual that you should be able to get after you create an account.
re: re: re: re: re: Starlux 300 or Starlux 500 service manual
November 07, 2017 09:31
Dear friend, thank you for the info!
re: re: re: re: re: re: Starlux 300 or Starlux 500 service manual
August 05, 2019 08:44
hi could we also have a manual for palomer 500 starlux. it is showing 064 error which is something about power but not really sure.
Are you looking to Buy or Sell a Laser? Do you need Service, Repair or Parts for you Laser or IPL system? Call LASER-TECH today at 855-527-3700 We Sell and Service all major brands and manufactures!