Lorad MIV - System Error 33 & Bucky Error 51
April 15, 2014 03:47
I've got a Lorad MIV having a System error 33! and sometimes this other error Bucky error 51! does not allow me to make an exposure. Does anyone have any idea of what could this be or have the service manual or troubleshooting manual for this system that I can get, would be very appreciated.
to rate and post a comment
re: Lorad MIV - System Error 33 & Bucky Error 51
April 16, 2014 08:31
your grid drive motors need to be replaced inside the bucky
re: re: Lorad MIV - System Error 33 & Bucky Error 51
March 25, 2015 03:08
If I only get the error 33 is it still the motors or would the IR pcb be more likely?
October 07, 2019 10:33
does any one have a schematic diagram in pdf format for the lorad miv?
April 17, 2014 06:02
Bucky problem... usually motor, sometimes circuit board...
July 30, 2014 09:30
i also need assistance with bucky
If I'm only getting the error 33 would that also be related to the motors or would the IR pcb be more likely? Thanks for any help, email@example.com
April 26, 2014 11:43
Thanks JeffS and James McGinty, the grid drive motor in the HTC Bucky needed to be replaced and problem solved! I appreciate your help a lot!
April 28, 2014 08:56
Ok so it's the grid motor, that's great. I have a trick or bandage awaitng motor replacement. Try remove the LAN cable going to the Bucky grid. During power-up the system does not see that this is a part of the system and should permit exposure I think......
Special-Pricing Available on Medical Displays, Patient Monitors, Recorders, Printers, Media, Ultrasound Machines, and Cameras.
This includes Top Brands such as SONY, BARCO, NDS, NEC, LG, EDAN, EIZO, ELO, FSN, PANASONIC, MITSUBISHI, OLYMPUS, & WIDE.