Logiq A-200 Mst 2211942-7 Board Replacement - Service les techniciens Forum

Logiq A-200 MST 2211942-7 board replacement

Tags: Ultrasound, GE

(8)
(2)

kevin barnes

Logiq A-200 MST 2211942-7 board replacement

February 21, 2020 10:30

I have a Logiq A-200 ultrasound using MST board 2211942-7. The box is not booting and previous posts said probably the board is bad.

I found a 211942-8 board - can I put this board in without any issues? With the next version / revision (8) be able to just be put in and I do not have to upgrade anything else on the box?

Thanks

Log inor Register

to rate and post a comment

(349)
(103)
(2)

Marcelo Antonio Correa

re: Logiq A-200 MST 2211942-7 board replacement

February 24, 2020 09:23

Hi, Kevin!

Prior to replace the board, replace the MST battery.

Over the same board you will find dip switches, place number one to on postition, and turn the L200 on.

Built-in SW installer will load the EEPROM.

After the boot, turn off L200, and return the dip switch to off postition.

Clock will probably shows date of 1998.

If you're not familiar on how to enter service mode and set date and time, call me inbox, please.

Additionally, the board you found will probably work, too.

Hope these help, take care, God Bless.

Kind regards,

MAC.

Log inor Register

to rate and post a comment

Repairs for less with FREE Transducer EVALS! CALL NOW 1-888-838-7488

If you have a broken or defective probe, why not attempt to repair before purchasing? This could save you $1,000’s! With a free evaluation we can let you know the cost of repair if applicable. Call today: 1-888-838-7488 Email: sales@sentinelimaging.net

DOTmed Certified
advertisement

 

advertisement

 

 

advertisement

 

advertisement