Ricardo Rabelo Baldassin
c arm siemens arcadis avantic
August 09, 2017 08:19
Dear colleagues greetings
I'm helping a friend in a repair of an avantic siemens
The system had error 7054 that was solved by changing the relay k22 on the board D31 that was with the contacts burned. Now the c arm does not present the error finishes the boot but does not release the rx informing that the system of image is with communication failure
Showing the error:
Internal image occured system
Any idea of the origin of this error?
I need a service manual, service password, and password bios
my email: firstname.lastname@example.org
I appreciate the attention
to rate and post a comment
re: c arm siemens arcadis avantic
August 10, 2017 08:09
If any body willing to help can please send it to my email too: email@example.com
Mario E Sarduy La Paz
August 10, 2017 08:05
Hi. I can help you. wirte me at firstname.lastname@example.org
August 10, 2017 11:00
This is all I have to offer for "Error ASP_ASM_E_70 was displayed after booting on"
Try reseating the boards in ASPIA PC (Graphic card, CIPP etc)
August 18, 2017 10:25
Arcadis avantic error asp_asm_E_70
Not addressing the DVP-3 card
The Aspia / Singo software did not address the DVP-3 card because the video card had reset for some reason and lost configuration. And only activated one of the monitors, the left one.
Reconfigured the video card for both monitors to be active the system returned to normal operation
Many thanks to all for the help!
re: re: c arm siemens arcadis avantic
November 18, 2019 10:40
Dear Ricardo, dear all, have the same problem, how can i get to this settings becaus my system will get a password in windows?
INTUITIVE THINKING • INTUITIVE WORKS • INTUITIVE SOLUTIONS • Contact TIBS today for your GE OEC C-arm Sales, Service or Parts. Parts & systems in stock now. Exchange or sell us your old C-arm. Call 866.499.3966 or email email@example.com.