Flag this model as duplicate or for review

Want to Buy A ALFA WASSERMAN Ace Chemistry Analyzer?

Post an RFP in minutes

Post a free Request for Proposal and get quotes on equipment you are looking to buy from DOTmed's Gold Service Dealers!

Find All Used, New, and Refurbished ALFA WASSERMAN Ace Chemistry Analyzer For Sale Listings on DOTmed

ALFA WASSERMAN Ace Chemistry Analyzer



Model Rating

starstarstarstarstar (1)
Information Provided By:
The ACE system (Figure 1) is fully automated. An internal computer directs all system
functions including test requisitioning, analyzer operation, data acquisition, data processing,
report generation and fault monitoring.
Definitions for a wide variety of manufacturer-validated tests are included with the system
and, for added flexibility, definitions for additional tests can be entered by individual
laboratories. Up to 200 different test definitions can be maintained on the system at one
System throughput is up to 165 tests per hour. STAT requests take priority over the routine
tests and may be entered at any time. Depending on the test requested, STAT tests are
completed within minutes.
Up to 40 different reagents can be used on the system at one time. The reagents are
maintained on the system at 12 º ± 2 ºC to maximize their on-system stability and on screen
system temperature reads 8 º ± 1 ºC in temperature monitor. They can be loaded anywhere
on the reagent tray, since each reagent container is positively identified by means of a
computer coded label. The liquid level of each reagent is measured when the reagent is used
and the operator is notified when a reagent is depleted.
Samples are introduced into the system directly from primary tubes or from sample cups
filled by the operator. An optional on-system barcode reader allows positive identification of
barcoded primary tubes, while sample cups are identified by means of a worklist prepared by
the operator. The liquid level in each sample container is measured when the sample is
aspirated, and the operator is notified when there is insufficient sample for analysis. Finally,
the time each sample remains on the system is monitored and, for quality assurance
purposes, a sample is not used after it has been on the system for more than two hours.




Share your opinion or experience with this equipment - Review this model


Jason Fisher


September 30, 2014 03:49


The Ace software is easy to follow, and walks you through each step. Both OEM generic are readily available.

1 person liked this
Log inor Register

to rate and post a comment

Développez la notoriété de votre marque
Enchères + Ventes Privées
Obtenir le meilleur prix
Acheter des équipement / pièces
Trouver le meilleur prix
Infos du jour
Lire Les dernières nouvelles
Consulter tous les utilisateurs DOTmed
Éthique concernant DOTmed
Voir notre programme d'éthique
L'or partie le programme de fournisseur
Recevoir des demandes PH
Programme de marchand de service d'or
Recevoir des demandes
Fournisseurs de soins de santé
Voir tous les outils des HCP (abréviation pour les professionnels de la santé)
Les travaux/Formation
Trouver / combler un poste
Parts Hunter +EasyPay
Obtenir des devis de pièces
Certification Récentes
Voir les utilisateurs récemment certifiés
Evaluation Récentes
Voir les utilisateurs récemment certifiés
Central de location
Louer de l’équipement à moindre prix
Vendre des équipements / pièces
Obtenir le maximum d'argent
Service le forum de techniciens
Trouver de l'aide et des conseils
Simple demande de propositions
Obtenir des devis pour des appareils
Expo Virtuelle
Trouver des services d'appareils
L'Access et l'utilisation de cet emplacement est sujet aux modalités et aux conditions du notre de nos MENTIONS LEGALES & DONNEES PERSONELLES
Propriété de et classe des propriétaires DOTmedà .com, inc. Copyright ©2001-2019, Inc.