Seller assumes all responsibility for this listing.
This is a DSD-201 dual stationendoscope reprocessor was manufacturedby Mintech/Medivators for Olympus. It comes with the attached fume evacuation filter system. Unit seems to be complete and look to be in nice condition but I am selling this as a parts machines because of the high cost of shipping. Unit has a small cosmetic plastic chip in the right front corner on center control panel .
There is are audible alarms sounding butI believethisis caused because the unit is not properly connected to a water can hear the internal pump working and I dont see anything works and fume evacuation filters look decent. No other testing has been done. What you see is exactly what you get here.
I am certain it is either working or can be made to work condition. Unit comes with internal basin lids and looks really easy to install and will only require filtered water line, drain line and 120 volt outlet. I have added the manufacturers description below.
This unit is in good cosmetic condition with some normal sign of previous use. I inspected both drain manifolds which are secure and not broken. Unit has small plastic chip on the bottom corner of the control panel as seen in some of the pictures. The unit was plugged in and turned on and the keypad responds to buttons being pushed. I can hear the internal pump running when I had it turned on.The printer is working. There has been no scavenging that I can tell. The basin lid cylinders are working properly to hold the lids open. Some of the chemical containers are partially full. No other testing has been done. The fume evacuation filter unit is workingwhen plugged in and turned on. The filter looks good but actual filter condition is unknown. I believe this reprocessor system is well worth the effort to get it up and running but it is being sold as-is.
Overall Dimensions: 48 tall x 36 wide x 22 front to back (29" front to back w/ fume filter)
I stand behind everything I sell and for 30 days I guarantee this Endoscope Reprocessor is exact to the description and pictures I have provided here or return it for a refund
Weight before packing is 475 lbs
Palletweight will be 525 lbs.
Pallet dimensions will be 48x40x65
The freight class is 100.
The NMFC is 120940 "Sterilizer"
To give you some idea it will cost approximately $200.00 for west coast shipping and approximately $450.00 for east coast shipping.Contact me with your delivery address for an exact freight quote.
Residential delivery, limited truck access, lift gate service and inside delivery will cost extra.
Pickup is always welcome. located in Coolidge Arizona which is 40 miles SE of Phoenix Az near I-10
All other international buyers must contact me prior to purchasing for a shipping quote and determination whether this item will ship feasibly to your country.It islarge/heavy and will be expensive to ship internationally.
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment.. The purchaser, indicates their acknowledgment of, and agreement to the terms of this disclaimer. There are no warranties which extend beyond the description on the face hereof. This item has been cleaned and handled in accordance with the manufacturer's instructions..