FREE SHIPPING to most locations in the USA and Canada.
This Canadian made hospital grade lift appears to be in good shape all the way round. The powered lifting arm and base spreader both work smoothly in response to commands from the remote control. New batteries will be installed prior to shipment. This lift, like most well made lifts, uses a motor driven work gear lifting mechanism and is not prone to leaks or fading as can be the case with lifts using hydraulic cylinders.
We also have Golvo 7007, Joerns Advance 340, Hill Rom Viking L, LIKO Sabina II EE, Arjo MaxiMove and Arjo Sara lifts in stock.
Buyers requiring a sling should write with information on the size and type of sling required based on recommendations from an Occupational Therapist or other trained caregiver. Depending on availability a (used) sling in good condition may be provided at no extra charge.
A lifting bar with digital scale designed for use on patient floor lifts is available for at an additional cost of $175.
According to the manufacturer:
The F-550 is equipped with maneuverable, high quality castors. The lift base allows for 53" (134.5 cm) of clearance to accommodate even the largest of chairs. The lift comes standard with a unique four point carry bar which provides additional head room clearance, enhancing patient/resident comfort. It is designed to work with average size adults as well as heavier persons up to 550 lbs (250 kgs) in weight.
From the bottom up, the F-550 is designed to make patient transfers easier and safer. It's made with aluminum so that it's lighter and easier to move. The castors are dual-wheeled, allowing it to roll smoothly on any type of flooring (including carpet). Handles are ergonomically designed to be comfortable for any height caregiver, and the legs spread wider to provide greater stability.
Lightweight, aluminum construction
Leg opening allows for 59" (147.5 cm) of clearance
Unique four point carry bar
Integrated charger or optional wall mounted charger
Ergonomically designed handles
Allows for easy positioning of patient with no mast interference
Available in low profile design to accommodate low height beds
Height to top of legs: 4.8 inches (122 mm)
Clearance from bottom of legs to floor: 1.9 inches (48 mm)
Wheels (dual-wheel castors): Front - 3" (76 mm)
Rear - 4" (101 mm) with brake
Length of lifting arm: 2.9 feet (88.4 cm)
Length of legs: 3.4 feet (103 cm)
Distance inside the legs (min): 2 feet (61 cm)
Distance inside the legs (max): 5 feet (152 cm)
Distance outside the legs (min): 2.3 feet (70 cm)
Distance outside the legs (max): 5.5 feet (167 cm)
Turning radius: 4.2 feet (128 cm)
Lifting height (min): 1.75 feet (53.3 cm)
Lifting height (max): 6 feet (183 cm)
Lifting range: 4.25 feet (129.5 cm)
Maximum weight load: 550 lbs (249 kgs)
Total Shipping Weight: WGS Box: 97 lbs (44 kgs)
Weight lower section - Without Box: 42 lbs (19 kgs)
Weight upper section - Without Box: 45 lbs (20 kgs)
US buyers will not pay any taxes or tariffs, border related fees or even handling charges. What is paid on check out is all that will be paid.
Canadian buyers will be required to pay Federal GST tax at 5%. No provincial taxes or handling charges will be applied. Buyers in Canada should request an invoice in Canadian funds rather than use the Buy Now option.
Buyers in other locations should write for an estimate of shipping charges in advance of their purchase.
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The buyer is purchasing an item(s) which may have been used for medical purposes and may have the potential to again be used for this purpose, however unless otherwise specified, at the time of sale the item is not considered to be bio-medically certified for use in any jurisdiction. The purchased item(s) is simply a device which operates in the limited manner described in the listing and/or electronic and mechanical components.
The purchaser agrees that the seller shall not be held responsible or liable:
* for any injuries or damages, whether incidental or consequential, associated in any way with the equipment;
* for compliance with regulations on ownership or use of the purchased item within the jurisdiction in which the purchaser resides and/or uses the item.
The purchaser, by buying this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.
The sale of this item may be subject to regulation by Health Canada, the U.S. Food and Drug Administration and other national/provincial/territorial/state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to Health Canada or FDA regulation and it is to be used for regulated medical services in the Canada or the USA, your payment for it indicates you are an authorized purchaser and will comply with these regulations. If you have questions about legal obligations regarding sales of medical devices, you should consult with Health Canada, the FDA or the regulatory authority
If you find the item is not as described in the ad it may be returned for a purchase price refund. Generally, all of our items have an inspection warranty which kicks in upon delivery for a period of 7 to 14 days. It is not an operational warranty as most items sold on DOTmed require biomedical certification before use. If you require additional coverage please contact us prior to purchase.