Here is a Thermo HERAcell 240i CO2 Incubator
Made in 2012
New costs about $19K
This Thermo HERAcell 240i CO2 Incubator is in good working order.
Please see the exact video and photos below.
**OXIDATION OF COPPER COMPONENTS**
When exposed to heat and humid air, the copper material of the interior container will oxidize.
This results in a discoloration of the copper components during the test run for checking the device functions.
Do not remove the oxide layer during routine cleaning as the antimicrobial effect of the copper material is based on it.
Testing we performed:
The Thermo HERAcell 240i CO2 Incubator passed all tests and was found to be fully functional:
Tested up to 55C: PASSED
Tested up to 20% CO2: PASSED
Maintained 45C over 48 hours: PASSED
Maintained 5% CO2 over 48 hours: PASSED
Tested control display: PASSED
Tested buttons: PASSED
Tested autostart: PASSED
System consists of:
Thermo HERAcell 240i CO2 Incubator
Patch cable with terminal block assembly
Standard power cord.
Configuration and Setup:
Capacity: 240L (8.4 cu.ft.)
Interior Dimensions (WxDxH): 23.9 x 23.0 x 26.4in (607 x 583 x 670mm)
Exterior Dimensions (WxDxH): 30.7 x 32.8 x 36.8in (780 x 834 x 934mm)
Temperature Range: 3-55C, Ambient: 18-33C
We get full external view of Thermo HERAcell 240i CO2 Incubator, and get clear view of interior and all tags and connections.
TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON "WEBSTORE" TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.
DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.
ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.
Items are sold as-is with no returns or refunds available unless explicitly stated.