The ConMed Hyfrecator Plus 7-797 includes a foot control pencil with 10 foot (3.0 m) cord, foot pedal, and sterile sheaths. It is in excellent condition and certified to proper operating specifications.

Warranty: 6 Months - Parts and Labor.

Safe and simple to use, the Hyfrecator Plus can be used for a wide range of applications, including dermatology, gynecology, ophthalmology, urology, dental, plastic surgery, and otolaryngology.

The Hyfrecator Plus 7-797's electronic circuitry provides a near linear power output. It provides precision whether it's being used at full power for broad surface coagulation or low output for delicate facial procedures.

• Power Requirements: 120 V, 50/60 Hz.
• Output Power:
  • Bipolar: 30 ± 6 Watts (500 Ohm load).
  • High: 30 ± 6 Watts (1000 Ohm load).
  • Low: 15 ± 3 Watts (500 Ohm load).
• Maximum Power: 36 Watts (500 Ohm load).
• Open Circuit Voltage:
  • Bipolar: 3000 Vp-p Max.
  • High: 7000 Vp, 10000 Vp-p Max.
  • Low: 4000 Vp-p Max.
• Frequency: 500 KHz at 31.25 KHz rate.
• Output Wave Shape: Damped sinusoidal.
• Output Regulation: ± 30% at 30 Watts (500 Ohm load) for a ± 10% line voltage.
• Duty Cycle: 10 seconds on, 30 seconds off.
• Audio: 1 KHz and 2 KHz, 65 db minimum.
• Display Reading:
  • Speed 0 - 30: 10 seconds.
  • Accuracy: 1% at any setting.
  • Low Output Terminal:
    • 0 - 5 Range: 0.2 watt increments.
    • 5 - 15 Range: 1 watt increments.
  • Bipolar and High Output Terminals:
    • 0 - 30 Range: 1 watt increments.
• 60 Hz Leakage: 50 microamps max. third wire of line cord open.
• Bipolar RF: Power reduction ratio is greater than 80% of maximum output.
• Dimensions: 7.5" (H) x 4" (D) x 8.75" (W) (190 mm x 102 mm x 222 mm).
• Weight: 6 lb (2.7 kg).