Seller assumes all responsibility for this listing.
Blend with 10 settings The Blend mode is a combination of cutting and hemostasis. The Bovie IDS-300 Generator gives the surgeon freedom to adjust the desired level of hemostasis. A setting of 1 is minimal blend with maximum cutting effect. A setting of 10 is maximum hemostasis (blend) with minimal cutting effect. This adjustment is easily achieved by a incremental adjustment. The Blend mode improves the rate of targeted tissue desiccation without increasing the power delivered by the generator.
Two levels of coagulation
Pinpoint provides precise control of bleeding in localized areas.
Spray provides greater control of bleeding in highly vascular tissue over broad surface areas.
Safety is digitally designed inside IDS technology meets the requirements of a variety of medical specialties, procedures, and indications in the modern OR.
BovieFDFS (Fast Digital Feedback System) The digitally controlled CUT and COAG functions give a consistent clinical output. For the first time in electrosurgery, through digital technology, we are able to measure tissue impedance in real time (5000 times a second). As the impedance varies, the power is adjusted to deliver a consistent clinical effect.
BovieNEM (Neutral Electrode Monitoring) Improved patient safety with the latest digital implementation.
BovieFCFS (First Come First Served) Discrete output design allows only one output device to be activated at any given time.
BovieDED (Digital Error Detection) Safety for the surgeon, OR staff, and patient. At the sign of any problem, the unit instantly disables the output, sounds an alarm and displays the appropriate error code.
Specifications:Dimensions: 12 1/4 W x 16 1/4 D x 6 H
"The sale of this item may be subject to regulation by the . Food andDrug Administration and state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject toFDA regulation, I will verify your status as an authorized purchaser of thisitem before shipping of the item."