Over 500 New Jersey Auctions End Tomorrow 06/15 - Bid Now
Over 300 Total Lots Up For Auction at Three Locations - MO 06/17, UT 06/18, CA 06/26

spacer
This Item is no longer available.

Click here to see the 209 Equipment Listings matching 'PHILIPS MX8000 Quad - LOADED CT - CT Scanner' on DOTmed

Post a free Request For Proposal for a PHILIPS MX8000 Quad - LOADED CT - CT Scanner and get quotes from our Gold Service Dealers
PHILIPS MX8000 Quad - LOADED CT Scanner
PHILIPS MX8000 Quad - LOADED CT Scanner

<span>À vendre</span>
PHILIPS MX8000 Quad - LOADED CT Scanner

  • Prix demandé :$45,000.00 USD [convert]
  • Condition : Utilisé - Excellent
  • Date : December 29, 2008
  • Liste # : 579741
Publicité

Description d'article

Le vendeur assume l'entière responsabilité de cette annonce..

Liste: #579741

  • Condition: Utilisé - Excellent
  • Marque: PHILIPS
  • Type: Scanner de CT
  • Modèle: MX8000 Quad - LOADED
Philips MX8000 Quad Slice CT Scanner – Year 2000

De-installed, in storage at a medical equipment facility (properly stored and climate controlled), ready to go.

Details:

• Mx8000 Platinum CT Scanner
o Ultrafast Multslice System (YC580XC), with MPR (curved and oblique), freely selectable pitch factor and 1mm slice thickness, 9gb hard drive, 4.1 GB EOD, 1GB RAM, 0.75 sec standard scan time, auto voice, voice recording, AutoArchive, and MasterFilm
o UltraImage and Software License (CT9253)
o Table Extension (CT9242)
o Water-Air 60hz cooling unit/heat exchanger (CT9239)
o PDQR, UltraFast subsecond axial and spiral reconstruction package (CT9282)
o UPS, 10 minute computer Backup
o 3-D MIP OP CTA & 3D Display f/Scanner & S/w (CT9261)
o CAC-OP HeartBeat-CS Cardiac Scoring f/Mx8000 (CT9272)
o SplitSecond Scan Package (CT9281)
o Prospective Gating Package (CT9291)
o ECG Monitor (CT9293)
o Q-BMAP II Bone Mineral Analysis Package (on board bone densitometer) (CT6511)
o VOL-REND-4D Angio f/Mx8000 & Soft License (CT9262)
o V-ENDO – Voyager/Software License f/Scanner (CT9263)
o MxView Visualization System, including 21” Monitor (CT9314M), 3D MIP-OP CTA and 3-D Display for MxView & s/w lic (formerly CT9261M) 3D shaded surface display visualization package for MxView and s/w license, Realtime CT and MR angiography (MIP) including MPR curve cuts along vascular structures

The unit has approximately 500,000 rotations; exact number is being retrieved. The tube only has minimal use. It was replaced about 1.5 years before full decommissioning for a 64 slice scanner, and received only minimal use (3-5 patients per week) during that time.

The scanner was never heavily used; Philips called the unit “light to moderate use” in its service contract.

Included with the unit is also a CT chiller, HOWEVER, the chiller may need service. There were a several instances of the unit shutting off while we used the CT for approximately six years. Engineers figured the issue was that the chiller was fit into the absolute bare minimum and was cause problems with cooling the chiller itself. This had nothing to do with the CT at all. The chiller may work great and it was simply our location; however, please expect to supply your own chiller and hope to be surprised.

Politique de retour

Items are sold as-is with no returns or refunds available unless explicitly stated.
Seller Information
  • Location :USA US flag
GSG Capitalspacer
Envoyer un message au vendeur: