Resmed Vpap Auto w h5i (heated humidifier) (NEW) VPAP Adapt targets minute ventilation for optimal therapy and outcomes—ResMed's unique ASV algorithm monitors and learns the patient's recent minute ventilation (tidal volume × breathing rate) and sets a target at 90% of recent minute ventilation. The Pressure Support and backup rate then continually adjust to reflect the patient's changing needs, reliably and steadily keeping patients on target all through the night. In ASVAuto mode, the EPAP also responds to flow limitation, snore and obstructive apneas on the next breath, in proportion to the severity of the event.

Specifications
ST, T and S Modes:
IPAP 4 to 25 cm H2O; EPAP 3 to 25 cm H2O
CPAP Mode Pressure:
4 to 20 cm H2O
Ramp Time : 0 to 45 min. (5-min. increments)
Starting Ramp Pressure: 4 to APAP/CPAP Pressure
VPAP Dimensions: 6.0by5.5by3.4” (153by140by86 mm)
Weight: 1.84 lb (835 g)
Sound pressure level (CPAP mode):
24 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2002
Air outlet:
The 22 mm conical air outlet complies with ISO 5356-1
Standard Filters:
Polyester fiber
Set-up:
LCD/keypad
Supplemental Oxygen:
Recommended maximum supplemental oxygen flow: 15 L/min
Housing Construction:
Flame retardant engineering thermoplastic
Operating Temperature:
Temperature 41°F to 95°F (+5°C to +35°C)
Humidity 10-95%, non-condensing
Altitude sea level to 8,500’ (2,591 m)
Pressure Relief on Exhale:
Easy-Breathe
Storage and Transport:
Temperature -4°F to 140°F (-20°C to +60°C), Humidity 10-95% non-condensing
90W Power Supply Unit:
Input range 100-240V, 50-60Hz, 70W (80VA) (typical power consumption), 100VA (maximum power consumption)

We have 2 left, Email me if you are interest its on sale!!!