I need your help,machine displays error8 on prep.
Fuse F101 found blown, replaced and blew again on prep.Connector K20 checked found properly connected.
Can anyone with more experience help me? Thank you.
Remove U101 from unit and measure it like a common fuse.
Warning: Discharge the capacitor bank before touching U101 !!!
If you find the fuse blown, first of all order a new one (I would order more than one in your place...).
Before replacing the fuse with a new one, I would recommend a thorough check of all the capacitor blocks for problems (e.g. blown capacitor fuses).
If the new fuse blows again (especially in high kV values) then you should suspect your x-ray tube...
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
kazal
Siemens Mobilette II
September 26, 2018 05:51
I need your help,machine displays error8 on prep.
Fuse F101 found blown, replaced and blew again on prep.Connector K20 checked found properly connected.
Can anyone with more experience help me? Thank you.
to rate and post a comment
Bill Masters
re: Siemens Mobilette II
September 27, 2018 06:05
Remove U101 from unit and measure it like a common fuse.
Warning: Discharge the capacitor bank before touching U101 !!!
If you find the fuse blown, first of all order a new one (I would order more than one in your place...).
Before replacing the fuse with a new one, I would recommend a thorough check of all the capacitor blocks for problems (e.g. blown capacitor fuses).
If the new fuse blows again (especially in high kV values) then you should suspect your x-ray tube...
to rate and post a comment