Shutter error in LUNAR DPX IQ
Can someone help me with the shutter error in LUNAR DPX IQ or send me esquma of OINK card please ... everything works but the collimator or shutter error'm very grateful ... thank you e-mail. hospservice@gmail.com .Sergio Azevedo
check the guide rails the shutter rides on at the ends of the shaft there should be o-rings I have see these o-rings dry rot and break which prevents the shutter from functioning correctly. does your shutter attempt to move?
The collimator on an IQ may have several issues that can cause failures. check that the collimator control kit is working properly (those are the tiny limit switches on the collimator). Also, verify that the solenoids are drawing the shutter fully open. Ultimately, you will need to narrow down if you problem is caused by those items, collimator control cable or bad OINK board. If you need parts we do have stock on all of the above.
(2)
sergio azevedo
Shutter error in LUNAR DPX IQ
January 09, 2015 04:51
Shutter error in LUNAR DPX IQ
Can someone help me with the shutter error in LUNAR DPX IQ or send me esquma of OINK card please ... everything works but the collimator or shutter error'm very grateful ... thank you e-mail. hospservice@gmail.com .Sergio Azevedo
to rate and post a comment
Lenny Place
re: Shutter error in LUNAR DPX IQ
January 09, 2015 06:49
check the guide rails the shutter rides on at the ends of the shaft there should be o-rings I have see these o-rings dry rot and break which prevents the shutter from functioning correctly. does your shutter attempt to move?
to rate and post a comment
(17)
(7)
Ben Williams
re: Shutter error in LUNAR DPX IQ
January 12, 2015 10:10
Hello Sergio,
The collimator on an IQ may have several issues that can cause failures. check that the collimator control kit is working properly (those are the tiny limit switches on the collimator). Also, verify that the solenoids are drawing the shutter fully open. Ultimately, you will need to narrow down if you problem is caused by those items, collimator control cable or bad OINK board. If you need parts we do have stock on all of the above.
Thanks,
Ben
ben@dexasolutions.com
to rate and post a comment
CHRIS NALMPANTIS
re: Shutter error in LUNAR DPX IQ
January 19, 2015 09:32
also check the bulb from shutter open if it is ok!
to rate and post a comment