Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 08, 2012 01:27
M>ichael I@m ex engeneer electronics of Shimadzu corporation in Chile i have MU-125P y M model manual user calibracion and diagrams in pdf my price is of USD 500 by this information please answerme soon i have calibracion and note of repair and failure in this manual please if you want this answerme to mantroequip@yahoo.es
Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 09, 2012 08:16
I am an ex-Shimadzu' engineer.
I can give to you alls the documents such as connection, service, operation.... manual with only 01 USD. Just kidding!!!
I will give it to you as soon as I am back to city. Now I am out of town.
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
October 02, 2012 03:12
Hello Hong, we require service manual for Shimadzu Mobile Art evolution, would you be able to send us a copy to garyeng@gmail.com. Appreciate it very much!
re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 29, 2016 08:14
Dear Gary Eng, have you had schematics of MC125L-30? If you have it, could you please send me schematic of XCONT 2007 Board? I just need diagram of XCONT 2007. Thank you so much.
Well, my email is ngochaupham2010@yahoo.com or hau.pham83@gmail.com
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
March 28, 2013 01:08
I am a Biomed at Mercy Hospital Iowa City. I am also in need of a shimadzu portable service manual to perform the pm. If you could send it to my dotmed or plonergan@renovo1.com, I would appreciate it. Thanks!!
re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 29, 2016 08:15
Hi Jay-R Ramirez, I just need schematics of XCONT2007 Board. If you have it, could you please send it to me. I really appreciate for your help. Thank you so much.
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 10, 2016 09:14
Hi Juan
The usual issue is burnt filament driver transistors.
Cause:
The handswitch
Why?
The user leaves the unit switched on and places lead jacket on the "table top" part. The lead jacket then pushes the handswitch which initiates "Filament Boost". This action overheats the driver FET (Q5-Q8 on main board), which then fails.
How to prevent?
*remove handswitch
*remove bottom screw of holder
*remove top screw of holder, move holder down and screw top screw in bottom screw's hole, leaving top hole open
*for proper fix, drill new holes under handle bar and move handswich to underneath handle bar.
To make unit work:
1)Replace Q5-Q8 4x @SK1518
2)Replace M94&M95 2x IR2110 (precaution)
To replace M94/M95 without killing the PCB:
1)Take very small and sharp side cutter and cut the legs one by one against the body of the ic
2)remove the legless ic
3) heat each leg, from the IC side of the board, with solder iron and GENTLY pull the leg out while heating. It should come out easy. Take care not to pull the tube out of the board.
4)when all the pins are out, use sucker to clean holes
5)insert new chip , and solder
6)clean board with a drop laqcuer thinners, and small brush or toothbrush
7)check to make sure there are no short circuit between legs
re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 29, 2016 08:14
Dear Michael Esposito,
If you have schematics of MC125L-30, could you please send me schematic of XCONT 2007 Board. I just need diagram of XCONT 2007. Thank you so much!
Michael Esposito
Service Manual for Shimadzu Portable Mod# MC125L-30
February 06, 2012 09:12
I am looking for a service manual with schematics for a Shimadzu X-Ray Portable Mod# MC125L-30, manufactured 1981.
Mike Esposito at mike.classic@sbcglobal.net
to rate and post a comment
(3)
(1)
pablo neira
Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 08, 2012 01:27
M>ichael I@m ex engeneer electronics of Shimadzu corporation in Chile i have MU-125P y M model manual user calibracion and diagrams in pdf my price is of USD 500 by this information please answerme soon i have calibracion and note of repair and failure in this manual please if you want this answerme to mantroequip@yahoo.es
to rate and post a comment
Hong Vinh Vo
Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 09, 2012 08:16
I am an ex-Shimadzu' engineer.
I can give to you alls the documents such as connection, service, operation.... manual with only 01 USD. Just kidding!!!
I will give it to you as soon as I am back to city. Now I am out of town.
to rate and post a comment
gary eng
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
October 02, 2012 03:12
Hello Hong, we require service manual for Shimadzu Mobile Art evolution, would you be able to send us a copy to garyeng@gmail.com. Appreciate it very much!
to rate and post a comment
(1)
Ngoc Hau Pham Thi
re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 29, 2016 08:14
Dear Gary Eng, have you had schematics of MC125L-30? If you have it, could you please send me schematic of XCONT 2007 Board? I just need diagram of XCONT 2007. Thank you so much.
Well, my email is ngochaupham2010@yahoo.com or hau.pham83@gmail.com
to rate and post a comment
Mohammed Abdullah
re: re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 08, 2016 10:20
Dear Sir,
I have all manuals for this system if you need it contact me,
magmesme@gmail.com
Regards
to rate and post a comment
(3)
Mauro Baldussi
re: re: re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
June 27, 2016 10:12
Hello
I need service manual and schematic fo MU125 M
Can you send me a copy pleas
mauro.baldussi@visionservice.it
to rate and post a comment
Mohammed Abdullah
re: re: re: re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
July 18, 2016 10:23
I have it contact
Magmesme@Gmail.com
Regards
to rate and post a comment
(15)
(8)
Ed Ramirez
re: re: re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 09, 2017 08:49
i need manual for this unit, please send to edsmedlink@hotmail.com. thanks ed
to rate and post a comment
Mohammed Abdullah
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
October 18, 2012 07:04
Dear Hong,
Kinldy can you send me the copy of this manuals for Shimadzu Portable Mod# MC125L-30
also please send me MU125P
at this mail
magmesme@gmail.com
thanks and bestregards
to rate and post a comment
Patrick Lonergan
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
March 28, 2013 01:08
I am a Biomed at Mercy Hospital Iowa City. I am also in need of a shimadzu portable service manual to perform the pm. If you could send it to my dotmed or plonergan@renovo1.com, I would appreciate it. Thanks!!
to rate and post a comment
(4)
(28)
Moshe Alkalay
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
March 25, 2014 05:22
can u please email me manuals? thank u.
sales@htig.com
to rate and post a comment
Mohammed Abdullah
re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
March 26, 2014 05:31
I HAVE THE MANUALS IF YOU NEED THEM CONTACT ME,
MAGMESME@GMAIL.COM
REGARDS
to rate and post a comment
(2)
Roupe
re: re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
December 23, 2014 10:01
Please, I need one too. Kindly send to my mail box, "roupecrowwn2006@yahoo.com". Thanks.
to rate and post a comment
JAY-R Ramirez
re: re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 24, 2016 04:17
Hi sir, can I request the user manual of shimadzu model mc125l-30? Thank you.
to rate and post a comment
Mohammed Abdullah
re: re: re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 08, 2016 10:20
Dear Sir,
I have all manuals for this system if you need it contact me,
magmesme@gmail.com
Regards
to rate and post a comment
JAY-R Ramirez
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 24, 2016 04:17
Hi sir, can I request for the user manual of shimadzu model: mc125l-30? Thank you.
to rate and post a comment
Mohammed Abdullah
re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 26, 2016 03:11
I have all manuals for this system if you need it contact me.
Magmesme@Gmail.com
Regards
to rate and post a comment
(1)
Ngoc Hau Pham Thi
re: re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 29, 2016 08:15
Hi Jay-R Ramirez, I just need schematics of XCONT2007 Board. If you have it, could you please send it to me. I really appreciate for your help. Thank you so much.
to rate and post a comment
(15)
(8)
Ed Ramirez
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 09, 2017 08:49
HELLO, NEED MANUAL FOR THE MC125L-30, CAN YOU SEND ME COPY. edsmedlink@hotmail.com. how many battieres does it use? thanks ed
to rate and post a comment
(3)
(1)
Juan Brugat
Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 26, 2012 08:28
As would be the cost to know that service protocols should be made to correct the error F3,for portable x ray Shimadzu MU125P.
to rate and post a comment
Johan Bezuidenhout
re: Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 10, 2016 09:14
Hi Juan
The usual issue is burnt filament driver transistors.
Cause:
The handswitch
Why?
The user leaves the unit switched on and places lead jacket on the "table top" part. The lead jacket then pushes the handswitch which initiates "Filament Boost". This action overheats the driver FET (Q5-Q8 on main board), which then fails.
How to prevent?
*remove handswitch
*remove bottom screw of holder
*remove top screw of holder, move holder down and screw top screw in bottom screw's hole, leaving top hole open
*for proper fix, drill new holes under handle bar and move handswich to underneath handle bar.
To make unit work:
1)Replace Q5-Q8 4x @SK1518
2)Replace M94&M95 2x IR2110 (precaution)
To replace M94/M95 without killing the PCB:
1)Take very small and sharp side cutter and cut the legs one by one against the body of the ic
2)remove the legless ic
3) heat each leg, from the IC side of the board, with solder iron and GENTLY pull the leg out while heating. It should come out easy. Take care not to pull the tube out of the board.
4)when all the pins are out, use sucker to clean holes
5)insert new chip , and solder
6)clean board with a drop laqcuer thinners, and small brush or toothbrush
7)check to make sure there are no short circuit between legs
Replace board, and get your money.
Easy
Lekker man, lekker!
to rate and post a comment
(3)
(1)
Juan Brugat
Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 26, 2012 09:09
Hey, that cost has to present the protocols to follow to repair, Error F3 on a portable x ray Shimadzu MU125P.
to rate and post a comment
(3)
(1)
pablo neira
Re: Service Manual for Shimadzu Portable Mod# MC125L-30
February 28, 2012 01:07
dear sir i have this manual service complete in paper i can scan you contact to me mantroequip@yahoo.es
to rate and post a comment
Mohammed Abdullah
re: Service Manual for Shimadzu Portable Mod# MC125L-30
October 09, 2012 08:48
i have it
contact me
magmesme@gmail.com
regards
to rate and post a comment
(1)
Ngoc Hau Pham Thi
re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 29, 2016 08:14
Dear Michael Esposito,
If you have schematics of MC125L-30, could you please send me schematic of XCONT 2007 Board. I just need diagram of XCONT 2007. Thank you so much!
to rate and post a comment
(1)
Ngoc Hau Pham Thi
re: Service Manual for Shimadzu Portable Mod# MC125L-30
January 29, 2016 08:14
Well, my email is ngochaupham2010@yahoo.com or hau.pham83@gmail.com.
Thank you very much,
to rate and post a comment