Medilab Global provides high-quality pre-owned imaging equipment, parts, and service to the healthcare industry worldwide. Our number 1 position is to provide excellent customer service.. 305-234-0084 | Email: info@medilabglobal.com | Hablamos Español
(10)
(6)
Manuel Brugat
Problem with a GE Advantx R/F with a MPPU Generator
January 08, 2020 10:12
Dear Colleagues:
I am having a problem with a GE R/F Advantx with a MPPU Generator.
Error 42C0 comes up on the control console saying this is a communication problem.
The error appears just after turning on the machine and it goes away by itself after the machine is on for a little while.
I really need someone that knows profoundly this machine and could give me a good insight of what could be the cause of this problem.
Sincerely:
Manuel (Manny) Brugat/Image Instrumentation, Inc.
to rate and post a comment
MRISAGE
re: Problem with a GE Advantx R/F with a MPPU Generator
January 09, 2020 09:09
Does the system operate normally?
to rate and post a comment
(10)
(6)
Manuel Brugat
re: re: Problem with a GE Advantx R/F with a MPPU Generator
January 15, 2020 10:28
MRISAGE:
The system after several or a lot of cycling, finally it works normally, but it takes a long while.
Do you have an explanation for this?
to rate and post a comment
MRISAGE
re: re: re: Problem with a GE Advantx R/F with a MPPU Generator
January 21, 2020 10:26
It could be a power supply in console. The best bet is to connect to the Advantx with a laptop and get the error log. Does the error code list a Node?
to rate and post a comment