For those who need to move fast and expand clinical capabilities -- and would love new equipment -- the uCT 550 Advance offers a new fully configured 80-slice CT in up to 2 weeks with routine maintenance and parts and Software Upgrades for Life™ included.
(33)
DIVYANG TRIVEDI
PASSWORD NEEDED TO GET SERVICE PRESET MANU IN LOGIQ 200
February 25, 2012 10:12
Hi,All...!
I need to get the service setup to set system time and date seting in Logiq @00 equipment but after pressing Shift+Ctrl,Shift+s,Shift+1 it asking to enter password and I tried Louise,diana.Isaac and wong but it shows invalid Password...
Can anyone have the perect procedure to know the correct password to enter in to SERVICE SETUP MENU...?
divyangtrivedi@hotmail.com
to rate and post a comment
Josip Vujnovic
Re: PASSWORD NEEDED TO GET SERVICE PRESET MANU IN LOGIQ 200
February 25, 2012 07:16
New password is:
REMOVED
Use new password (REMOVED) after above mentioned date.
to rate and post a comment
(33)
DIVYANG TRIVEDI
Re: PASSWORD NEEDED TO GET SERVICE PRESET MANU IN LOGIQ 200
February 26, 2012 11:21
Thanks a lot for your kind help...but does it require any service dongle before this setup...? as i don't have the dongle with me...
to rate and post a comment
(61)
(13)
Ricardo A. Sanchez
Re: PASSWORD NEEDED TO GET SERVICE PRESET MANU IN LOGIQ 200
February 27, 2012 11:36
Mr. Josip, do you have the passwords for Logiq 400 and Logiq 500? than ks.
to rate and post a comment
Josip Vujnovic
Re: PASSWORD NEEDED TO GET SERVICE PRESET MANU IN LOGIQ 200
February 29, 2012 06:22
Hi..
For Logiq 400: REMOVED
Use new password (REMOVED)
For Logiq 500: REMOVED
Use this new password (REMOVED)
kind regards
to rate and post a comment
(61)
(13)
Ricardo A. Sanchez
Re: PASSWORD NEEDED TO GET SERVICE PRESET MANU IN LOGIQ 200
March 25, 2012 11:08
thanks a lot for your kindly help. Let me know if I can help you with something, thanks
to rate and post a comment
(1)
milton pi nheiro
re: Re: PASSWORD NEEDED TO GET SERVICE PRESET MANU IN LOGIQ 200
June 14, 2014 09:48
i am waiting your replay. regards Milton
to rate and post a comment
(5)
Zeljko Tomic
re: Re: PASSWORD NEEDED TO GET SERVICE PRESET MANU IN LOGIQ 200
October 28, 2013 01:53
And how to set the date after replacing the battery?
to rate and post a comment
(1)
milton pi nheiro
re: Re: PASSWORD NEEDED TO GET SERVICE PRESET MANU IN LOGIQ 200
June 14, 2014 09:48
In logiq 200 when switch on the m/c scan area image quality is good after 10 minutes going down dull and switch off again switch on is coming after 10 mnts going dull what could be the problem ?plz tell me how to go service setup,password
to rate and post a comment