Can any one help me with this error on GE CT/e: Axial Scan Error, error code is 20-1001-26; error detected by OGP, DAS trigger of one rotation, between G-pulse2, is under specification on Axial Scan. Plz adv.
After cleaning the slip rings, the new error message is Scan Proc Comm Error: Code:11-1010-02: Error detected by : TGP(MP). TGP(MP) did not recive neither ACKnor NACK from OGP. Plz adv.
After cleaning the slip rings, the new error message is Scan Proc Comm Error: Code:11-1010-02: Error detected by : TGP(MP). TGP(MP) did not recive neither ACKnor NACK from OGP. Plz adv.
After cleaning the slip rings, the new error message is Scan Proc Comm Error: Code:11-1010-02: Error detected by : TGP(MP). TGP(MP) did not recive neither ACKnor NACK from OGP. Plz adv.
The error message still pointing towards communication between tgp and ogp.
1.If cleaning of slipring doesn't work, pls check signal carbon brushes. If they are shorter then arrow markers , replace them
2. If it is okay , check if your ogp is alive. Check 115 isokay. Ogp takes 24v dc. Chk if loop leds are glowing there. Mail me at vijaysharma@ rxmedicalsystems.com for faster response. Thanx.
Can any one help me with this error on GE CT/i:Axial scan error.Code:20-1001-23 Error detected by:OGP HV ON was not activated by JEDI on Axial scan after EXPCMD was activated by OC.
XG Error phase is 4 code is 60.Detail error code:60-0313H Exposure:ILR max current detected.
(1)
Jim
Axial Scan error in GE CT/e
February 10, 2015 10:58
Dear friends,
Can any one help me with this error on GE CT/e: Axial Scan Error, error code is 20-1001-26; error detected by OGP, DAS trigger of one rotation, between G-pulse2, is under specification on Axial Scan. Plz adv.
to rate and post a comment
(15)
(8)
Carlos Duran
re: Axial Scan error in GE CT/e
February 10, 2015 06:31
You have a noisy signal. This can be checked in TGP
to rate and post a comment
(11)
(16)
Vijay Sharma
re: Axial Scan error in GE CT/e
February 11, 2015 09:33
please clean sliprings particularly signal rings , situation will surely improve..
Best Regards,
to rate and post a comment
(11)
(16)
Vijay Sharma
re: Axial Scan error in GE CT/e
February 11, 2015 09:33
please clean sliprings . result should surely improve.
Regards,
to rate and post a comment
(1)
Jim
re: re: Axial Scan error in GE CT/e
February 17, 2015 10:29
After cleaning the slip rings, the new error message is Scan Proc Comm Error: Code:11-1010-02: Error detected by : TGP(MP). TGP(MP) did not recive neither ACKnor NACK from OGP. Plz adv.
to rate and post a comment
(1)
Arthur Singh
re: Axial Scan error in GE CT/e
February 11, 2015 09:31
CLEAN SLIP RINGS, SPECIALLY SIGNAL SLIP RINGS. CHECK SIGNAL BRUSHES ALSO.
to rate and post a comment
(1)
Jim
re: re: Axial Scan error in GE CT/e
February 17, 2015 10:29
After cleaning the slip rings, the new error message is Scan Proc Comm Error: Code:11-1010-02: Error detected by : TGP(MP). TGP(MP) did not recive neither ACKnor NACK from OGP. Plz adv.
to rate and post a comment
(3)
Edurado Madeiros
re: Axial Scan error in GE CT/e
February 11, 2015 09:34
If This error occured sometimes, check at first brushs condition and clean up slip ring, then make tests.Let me know actions result
to rate and post a comment
(1)
Jim
re: re: Axial Scan error in GE CT/e
February 17, 2015 10:29
After cleaning the slip rings, the new error message is Scan Proc Comm Error: Code:11-1010-02: Error detected by : TGP(MP). TGP(MP) did not recive neither ACKnor NACK from OGP. Plz adv.
to rate and post a comment
(3)
Edurado Madeiros
re: re: re: Axial Scan error in GE CT/e
February 18, 2015 08:30
Hi! Jim let me know your email . I can help you
to rate and post a comment
(4)
Martin Martinez
re: Axial Scan error in GE CT/e
February 18, 2015 08:35
Please contact me by eMail martin.martinez @prodigymovil.com
to rate and post a comment
(11)
(16)
Vijay Sharma
re: re: Axial Scan error in GE CT/e
February 19, 2015 10:21
The error message still pointing towards communication between tgp and ogp.
1.If cleaning of slipring doesn't work, pls check signal carbon brushes. If they are shorter then arrow markers , replace them
2. If it is okay , check if your ogp is alive. Check 115 isokay. Ogp takes 24v dc. Chk if loop leds are glowing there. Mail me at vijaysharma@ rxmedicalsystems.com for faster response. Thanx.
to rate and post a comment
KIRAN TRIBHUVAN
re: Axial Scan error in GE CT/e
August 18, 2016 12:36
Can any one help me with this error on GE CT/i:Axial scan error.Code:20-1001-23 Error detected by:OGP HV ON was not activated by JEDI on Axial scan after EXPCMD was activated by OC.
XG Error phase is 4 code is 60.Detail error code:60-0313H Exposure:ILR max current detected.
to rate and post a comment
(12)
(2)
Thomas Onyema
re: re: Axial Scan error in GE CT/e
August 31, 2016 12:36
Kiran, how were you able to resolve the problem?. I have similar error message on our DXi. kindly assist. Thanks.
to rate and post a comment
KIRAN TRIBHUVAN
re: re: re: Axial Scan error in GE CT/e
September 02, 2016 10:36
pls check the tube .
to rate and post a comment