Over 90 Total Lots Up For Auction at One Location - WA 04/08

AGFA DRYSTAR AXYS problem

Tags: Laser and Dry Cameras

Artemio Santacruz

AGFA DRYSTAR AXYS problem

January 10, 2014 10:00

hello everybody I need your help and experiencie with Agfa Drystar AXYS error "system failure"
i tray to update by cd Card but nothing happeng all the keypad not respond to change the menu and the display allways system failure when you star the push botton to on any movement you can not hear
thanks and regards
Artemio santacruz

Log inor Register

to rate and post a comment

(8)
(2)

HyderAli12

re: AGFA DRYSTAR AXYS problem

January 11, 2014 06:25

frist check the Ram, then Power supply, if not solve then Hard disk .... thanks

1 person liked this
Log inor Register

to rate and post a comment

Artemio Santacruz

re: re: AGFA DRYSTAR AXYS problem

January 13, 2014 06:24

Thank you very much my friend! i will tray this suggestion and I´ll let you know! Best regards.

Log inor Register

to rate and post a comment

(8)
(2)

HyderAli12

re: AGFA DRYSTAR AXYS problem

January 11, 2014 06:25

Frist Check the Ram, then power supply, or if not solve then Hard disk..

1 person liked this
Log inor Register

to rate and post a comment

(8)
(3)
(32)

sitwat kashif

re: AGFA DRYSTAR AXYS problem

January 11, 2014 06:25

Frist check the Ram, then power supply if not solve problem may be Hard disk...

1 person liked this
Log inor Register

to rate and post a comment

(7)
(2)

Lloyd Bennett

re: AGFA DRYSTAR AXYS problem

January 13, 2014 08:01

Sounds like the software is not loading. Reload the software (same revision or higher), if it will not load you have a bad hard drive.

1 person liked this
Log inor Register

to rate and post a comment

(16)
(5)

RODRIGO CORTeS

re: AGFA DRYSTAR AXYS problem

January 13, 2014 04:25

Hello Artemio, the problem is your boards module. If you are in México, contactme. rodrigo.cortes@corper.com.mx

1 person liked this
Log inor Register

to rate and post a comment

(75)
(22)

CARLOS RUEDA

re: AGFA DRYSTAR AXYS problem

February 27, 2014 01:11

Have you resolved your problem? If you need support or information about this kind of machines. Do not hesitate reach me.
Regards.

Log inor Register

to rate and post a comment

(40)
(8)
(1)

Paul Galo

re: re: AGFA DRYSTAR AXYS problem

June 29, 2016 10:18

Hello carlos. I have the same error system failure but the SW installation is not working sio i tried to do the upgrade in anotrher system in good condition and the sw did not load neither. What is the procedure to install sw? Maybe i have an error in the procedure. Thanks

Log inor Register

to rate and post a comment

stats
DOTmed text ad

stats
advertisement

Upcoming Auction Events

NorthWest Supply
TIMED
Apr 08, 2024 (99 lots)