Over 1800 Total Lots Up For Auction at Four Locations - NJ 04/25, MA 04/30, NJ Cleansweep 05/02, NJ 05/08

Spanish Spanish
spacer
Listing 2931969 Listing 2931969 Listing 2931969 Listing 2931969 Listing 2931969 Listing 2931969
Listing 2931969 Listing 2931969 Listing 2931969 Listing 2931969 Listing 2931969 Listing 2931969

For Sale ALCON INFINITI Phacoemulsifier

  • Condition : Used - Good
  • Weight : 235.00 Lbs
  • Qty. Available : 1
  • Date : April 21, 2024
  • Listing # : 2931969
Return Policy
Get Financing
Forward Listing
Seller Info
Advertisement

Item Description

Seller assumes all responsibility for this listing..

Listing: #2931969

  • Condition: Used - Good
  • Brand: ALCON
  • Type: Phacoemulsifier
  • Model: INFINITI
  • MPN: 210-0000-511
  • Depth: 360 inches
  • Height: 756 inches
  • S/N: 1202235001X
  • Width: 276 inches
  • Year of Manufacture: 2012
  • Warranty: 6 Month
  • Software Version: 2.06
Infiniti Vision System 2.06 software version with Ozil compatibility.
Included with the system is a Remote, Foot Pedal, Ozil Handpiece, Operators Manual, and Dust Cover, and Video Overlay System.

All Systems Included a Six Month Warranty.

---------------------------------------------
THE LISTED ERROR CODES ARE SHOWN ON THE INFINITI VISION SYSTEM DISPLAY PANEL WHEN THE SYSTEM DETECTS A PROBLEM. THE ERROR CODES ARE SEPARATED BETWEEN ADVISORIES, WARNINGS, AND FAULTS.

Alcon Infiniti Error Code 160: Reinsert FMS. Replace FMS if Problem Persists.
Alcon Infiniti Error Code 161-164: Please Check Fittings and Reprime. Replace FMS if Problem Persists.
Alcon Infiniti Error Code 165-167: Flow Obstruction. Please Check Handpiece Free Flow
Alcon Infiniti Error Code 169: Irrigation Pressure is Low. Please Check Bottle and Fittings.
Alcon Infiniti Error Code 170: Reflux Terminated. Reflux Fluid Volume Depleted.
Alcon Infiniti Error Code 171: Excessive Pressure in Drain Bag. Replace FMS.
Alcon Infiniti Error Code 175-176: Infusion Pressure Sensor Calibration Error. Remove FMS. If Problem Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 180: Invalid FMS ID. Replace FMS.
Alcon Infiniti Error Code 181: Excessive Ambient Light. Unable to Calibrate FMS ID Sensors.
Alcon Infiniti Error Code 182: Excessive Ambient Light. Unable to Read FMS ID.
Alcon Infiniti Error Code 183: Remove MultiPak FMS, See MultiPak Directions for Use
Alcon Infiniti Error Code 250: Tuning in Air
Alcon Infiniti Error Code 251: Insert Handpiece
Alcon Infiniti Error Code 252: Multiple Handpieces Detected. Remove a Handpiece.
Alcon Infiniti Error Code 254: Loose Tip
Alcon Infiniti Error Code 256-270: Replace Handpiece. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 271: Two Handpieces Detected. Remove a Handpiece.
Alcon Infiniti Error Code 272-274: Replace Handpiece. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 276: Ultrasound Error. Release Treadle and Retry. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 277: Handpiece Disconnected While Applying U/S Power. Release Treadle, then Insert and Tune Handpiece.
Alcon Infiniti Error Code 278: Replace Handpiece. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 279: Unknown Handpiece Detected.
Alcon Infiniti Error Code 280: Unsupported Handpiece Detected.
Alcon Infiniti Error Code 281: Cautery Compliance Error. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 282: Coagulator Error. If Problem Persists After Restarting System, Contact Alcon Technical Services.
Alcon Infiniti Error Code 350: Footswitch Failure Detected. Check Footswitch, Clean Under Rear Section of Treadle, and Remove Debris if Present. (Reference Maintenance Section of Operators Manual.) Ensure Treadle is Not Depressed, then Reset Footswitch. If Condition Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 351: Footswitch Failure Detected. Check and Reset Footswitch. If Condition Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 352: Footswitch Failure, Replace Footswitch.
Alcon Infiniti Error Code 353: Footswitch Failure Detected, Check and Reset Footswitch. If Condition Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 450: Footswitch is Depressed, Release Footswitch Before Pressing Prime FMS, Fill, or Test Handpiece.
Alcon Infiniti Error Code 451: Can Not Recognize Footswitch. Please Check Footswitch Connection and Reset Footswitch. If Condition Persists, Contact Alcon Technical Services.
Alcon Infiniti Error Code 460: Please Install Footswitch.
Alcon Infiniti Error Code 461: Infiniti ® Backup Power Service Needed, Contact Alcon Technical Services.
Alcon Infiniti Error Code 463: Invalid Language(s) Found During Initialization. One or More Installed Languages May Not be Available.
Alcon Infiniti Error Code 464: The Language Specified by System Settings is Invalid.
Alcon Infiniti Error Code 465: The Tune Sequence was Interrupted by removal or the Handpiece.

Return Policy

Seller Information
MEDiSURG
John Weymouth
(37) speedometer25
profile image
Shop with confidence
DOTmed Certified
Buyers Guide Advertiser
VTS Booth
Badges 14
Citi Capital Groupspacer
Send the Seller a message: