Product Functionality
Technician Notes: Milling System Only
Manufactured Date: 06/22/2018
Input: 100-230Vac, 3.5A, 320VA, 50/60Hz
Unit is Used but in Fair Condition
Display Requires Replacement (Discoloration Obstructs Displayed Information)
Inner Left Seal Torn
Minor Dental Plaster Residue
Left and Right Step Motor Function Properly
Center Spindle Functions Properly
Audible Tones Operating
Key Functions/Navigation Menu Functions Properly
Water Jet Nozzles Function Properly
Water Tank Reservoir Seals Without Leaks
Water Filter Spring Intact
Water Reservoir Fill Port Intact with Serviceable O-Ring
Drainplug Intact with Serviceable O-Ring
Accessory Trays Intact
Calibration Tool
Recommended:
Water Filter Replacement
LCD Controls Display
Missing Components: Power Supply Cable
Data/Ethernet Cable
Operating Manual/Software
R2v3 Functionality:
F3 - Key Functions Working
A subset of the primary functions of the device that an ordinary user of the device expects to function are verified working through manual or software tests
Software may not be loaded or configured
Hardware required for key functions to be tested may have been removed after testing (e.g. hard drive)
May be missing components or parts not essential to key functions
Secondary functions may not be tested or working
May not include focus materials that are not working or not tested
All missing components or parts will be listed for each item
Cosmetic Description
Scuffs/Scratches/Marks: A few marks/scratches on frame
R2v3 Cosmetics:
C4 - Used Good
Cosmetic blemishes include minor scratches and/or other surface imperfections from consistent use, but equipment is in good condition overall
Minor wear of labeling may be visible
Small dents and small areas of discoloration may be present from the removal of tags
No damage to latches or hinges, nor any missing parts, panels, bezels, or cover
NOTE: LEGAL DISCLAIMER PURCHASE TERMS
Buyer accepts all responsibility for the electrical safety inspection, testing and calibration when applicable, of a purchased item. Medical and dental items must be inspected for safety by a biomedical technician before being placed into use. The buyer is responsible for ensuring the safety of the item for its intended use. If the item is to be used in conjunction with patient care and/or diagnosis, it is the responsibility of the buyer to get proper certifications or licenses for the use of the item.
Return Policy
30-day D.O.A. applies if an item arrives in any condition other than what is listed in the description.
