The following are just some of the products and services on display at AHRA 2019.

ALTA750™ CT Tube
Richardson Healthcare - Booth 1402
The ALTA750™ is a form, fit and function replacement for the Toshiba/Canon Medical Systems CXB-750D/4A CT tube. It is certified on OEM platforms, including the Aquilion 4- through 64-slice and the PRIME (Gen. 1). To optimize and increase the life of your new ALTA750 tube, Richardson Healthcare includes a Heat Exchanger and new HV Cable Kit as a complete tube assembly. For a limited time, all first-time customers of our ALTA750 will receive a complete satisfaction, money-back guarantee for 90 days after installation.

Varex Imaging - Booth 417
The 3024MX is a second-generation FPD for Digital Breast Tomosynthesis (DBT) and Full Field Digital Mammography (FFDM). Its maximum frame rate of 5 fps, 40 percent higher saturation dose, and improved low dose performance make the 3024MX a robust and cost-efficient choice for 3D tomosynthesis and mammography.

Varex Imaging - Booth 417
The B-121 is an upgrade to the leading B-115 housing design and includes a unique fan shroud design allowing 300W of heat dissipation, which enables high patient throughput and tomosynthesis imaging, minimizing the possibility of overheating the X-ray unit. Varex offers a large tube portfolio for Full Field Digital Mammography (FFDM), including the widely used M-113 insert in the B-121 housing.

Sofia 3D Breast Ultrasound
Hitachi Healthcare Americas - Booth 509
SOFIA solves the economic and logistic challenges associated with wholebreast ultrasound by using a full-field radial scanning method. The resulting throughput, efficiency, and patient comfort make SOFIA the ideal solution for women with dense breasts. SOFIA scans an entire breast in a single 30-second radial sweep. SOFIA does not require a dedicated room allowing you to use SOFIA for a wide variety of diagnostic ultrasound exams in addition to whole-breast imaging. Unlike other systems, it requires no additional consumables and no time-consuming pre-scan preparation. Designed to reduce patient anxiety by providing the most comfortable and private exam possible, exams are done in the prone position, allowing the patient to rest comfortably and remain completely covered during the short scan.

VIVIX-S 1417N Panel & VxVue software with Pureimpact®
Vieworks - Booth 1515
The VIVIX-S 1417N Panel combined with VxVue software with Pureimpact® is a package ideal for today’s fast-paced medical environment. This award-winning package combines: Reliability in Any Environment - water resistant, dustproof, impact/drop tested; Mobile Design; Superior Image Quality including fine detailed imaging, soft tissue delineation, stable imaging processing; Automated Functionality and Touch-Screen Interface.

FerrAlert™ Encompass
Kopp Development - Booth 514
Kopp Development Inc., the leading manufacturer of ferromagnetic detectors for MRI Safety is proud to set course to the most comprehensive safety solution, FerrAlert™ Encompass, that automatically detects and logs unintended ferromagnetic objects entering Zone IV. It is the only system that provides a photographic stream that is date and time stamped, and does not require manual logging, thus allowing the technologists to perform uninterrupted patient care. The data analysis software allows effortless generation of reports for TJC inspections. It also allows for the analysis of safety trends that can be shared throughout the entire hospital system.

Emma 1.5T MRI System
Galen MRI Systems
Galen MRI Systems Limited specializes in developing new-generation MRI systems. Galen is driven by a team of devoted engineers, healthcare professionals and management experts.

Galen developed with Dr. Christopher Comstock, head of imaging at Memorial Sloan Kettering Cancer Center (MKSCC) and co-created Emma 1.5T Breast MRI system with full-body capabilities.

Emma features feet-first entry, noise-reduction unit and optimal scanning protocols that offers a shorter, quieter and more comfortable scanning experience. The machine-learning and A.I. capabilities together with customized three cup-size breast coils further optimized the comprehensive breast implant, dense breast and breast cancer diagnosis. Learn more at galenmri.com or contact us at info@galenmri.com

Mammo FFDM™
Phantom from Gammex
The Mammo FFDM™ Phantom supports testing Full Field Digital Mammography systems, in compliance with the 2018 Digital Mammography Quality Control Manual from the ACR.

It evaluates artifacts over the entire detector with a single image, supporting quick detection of objects from 0.14 to 1.0 mm. This phantom simulates radiographic characteristics of compressed breast tissue, including micro-calcifications, ductal fibrous structures and tumor-like masses.

Learn more at sunnuclear.com/ffdm.

iFIX™ patient stabilization system
Beekley Medical Booth #1117
Introducing iFIX™ – a patient stabilization system that conforms to patient anatomy like a second skin. Comprised of both reusable and single-use components, iFIX’s versatile design allows for a variety of uses offering a head-totoe solution for patient stabilization in multiple modalities. The comfortable iFIX Fleece stretches and gently “hugs” the contours of the patient’s body for gentle, yet secure stabilization. The Fleece and other single-use components allow for increased hygiene and lower the risk of cross-contamination over other methods. Ideal for CT • MRI • X-Ray • Fluoroscopy • Ultrasound Distributed by Beekley Corporation to customers within the United States and its territories

Bella Blankets® protective coverlets for mammography
Beekley Medical Booth #1117
Better positioning, better imaging, and better patient care. Thin by design, Bella Blankets allows technologists to position patients as close to the chest wall as possible. Textured material helps with “hard to position” breasts, prevents breasts from sticking to receptor plate to avoid skin tears, helps to shield cuts or infections in the inframammary fold, and acts as a sanitary barrier. New Vertical Channel Technology™ allows air to push out and release upon application, reducing air bubbles and the Easy-lift PIK-UP™ tab allows for easy removal from the receptor plate without leaving residue.

MAMMOMAT Revelation
Siemens Healthineers - Booth 1203
Meet MAMMOMAT Revelation, the breast imaging system from Siemens Healthineers that changes how women see mammograms. Discomfort is among the most common reasons why women avoid their mammogram. MAMMOMAT Revelation changes everything, with an exam that’s personalized to each women’s anatomy. How? With personalized compression that reaches optimal force based on the structure of each woman’s breast. And with soft edge paddles that make positioning comfortable and easy. It features wide-angle breast tomosynthesis, with the widest image acquisition angle in the market. Join us to learn how Revelation changes how she sees mammograms, from another chore to an empowering choice.

WorkstationOne
Three Palm Software
WorkstationOne is a software solution for radiologists reading breast imaging modalities. The system provides a built-in workflow to aid efficient reading and includes expert tools such as systematic masking and all-pixels viewing as part of the workflow. The user can easily modify the workflow using a visual UI. WorkstationOne operates with any PACS and supports established modalities such as 2D mammography and tomosynthesis and includes newer CAD and decision support display and interaction for 2D and 3D mammography. Plugins are included for related modalities (ultrasound, MRI, documents), along with the ability to generate reports, either stand-alone (using an included plugin) or via integration with external systems. An optional 3D ultrasound (ABUS, ABVS) plugin viewer is also available. Learn more at www.threepalmsoft.com or email us at info@threepalmsoft.com

MobileDaRt Evolution MX8
Shimadzu Medical Systems USA - Booth 803
The MobileDaRt MX8 is Shimadzu’s Next Generation mobile radiographic system with designed in features and value like “GlideView”, the MX8’s collapsing X-Ray tube column that raises the bar where features and operability are concerned. Using Shimadzu exclusive technology, the X-Ray tube column appears to glide on air with effortless motion, regardless of the direction of extension. Other exclusive features include a LED equipped collimator with a duplicate set of shutter controls on the back face as well as the front face. An adjustable height driving handle allows both tall and average height operators to comfortably drive without awkwardness.

Digital X-ray Detectors
LG Electronics - Booth 1410
LG Electronics, a leading provider of premium commercial-grade displays, offers 14” x 17” wireless and 17” x 17” tethered Digital X-ray Detector acquisition devices. Equipped with high performance CsI scintillator, 140 um pixel pitch resolution and 16-bit image processing, they provide exceptional image quality with fast image viewing and transfer for enhanced productivity and efficiency. Rated at IP41, these devices are protected against liquid contact and can withstand up to 330 lbs. full uniform load and 220 lbs. local point load weight. Integrate with existing X-ray generators and use LG AWS Digital X-ray image acquisition software to enter patient information, perform image processing, image manipulation and DICOM image printing/transfer. Both DXD panels and AWS software have FDA 510k Class II approval.

TechGate Auto
Aegys - Booth 1016
TechGate Auto from Aegys is an advanced warning system for controlling access to the MRI room. Warning messaging is effectively communicated through the utilization of bright, dynamic, color changing LED barrier arms which extend across the opening to the MRI room. These barrier arms are rotated into position automatically by activation from MRI conditional remote transmitters or by the transit of anyone into or out of the room. Unlike plastic chains or retractable belts that require manual latching each and every time, the TechGate Auto self deploys ensuring effective hazard warning and access control at all times.

SONIALVISION G4 series
Shimadzu Medical Systems USA - Booth 803
The SONIALVISION G4 is a highly versatile RF system designed to perform a wide variety of examinations, including angiography, orthopedic, video fluoroscopy (for swallowing exams) and general radiography. The G4’s Next Generation digital imaging platform is capable of Tomosynthesis, an advanced application option used for 3D like imaging. Also available is Slot Advance Radiography, an EDGE application used for long spine and limb imaging. The G4 table is bariatric rated and supports a 700lb static patient load. The Sonialvision G4 LX is the newest member to the series with 180 cm SID eliminating the need for an overheadtube column and associated costs but capable of full chest X-rays using the wall bucky.